User Login    
 + Register
  • Main navigation
Main Menu
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search

Advanced Search
Google Ad

Browsing this Thread:   1 Anonymous Users





Rallytwit
Re: A15 piston-to-bore clearance
#1
No life (a.k.a. DattoMaster)
Joined:
2002/11/26 0:38
From Las Vegas USA
Group:
Registered Users
Posts: 2034
Offline
I could be off here but if you add the clearances to the piston dimensions you get 2.994 for every cylinder. Wouldn't you just be moving the issue from one cylinder to the next?

I'd run it and not worry as only #1 is outside the tolerance and it a rely is. My poor tired A12 race motor had way more than that and it still pulled over 7000, the bores were so bad I had to got to 1mm oversize.

Tom

Posted on: 2016/7/24 0:02
Transfer the post to other applications Transfer

Subject Poster Date
     A15 piston-to-bore clearance TexasMidget 2016/7/22 5:01
       Re: A15 piston-to-bore clearance ddgonzal 2016/7/22 5:13
       Re: A15 piston-to-bore clearance TexasMidget 2016/7/22 5:16
       Re: A15 piston-to-bore clearance TexasMidget 2016/7/22 5:53
         Re: A15 piston-to-bore clearance ddgonzal 2016/7/22 6:32
       Re: A15 piston-to-bore clearance TexasMidget 2016/7/22 15:11
         Re: A15 piston-to-bore clearance D 2016/7/23 3:54
       Re: A15 piston-to-bore clearance A14force 2016/7/23 12:24
       Re: A15 piston-to-bore clearance Rallytwit 2016/7/24 0:02
       Re: A15 piston-to-bore clearance TexasMidget 2016/7/24 4:01
         Re: A15 piston-to-bore clearance ddgonzal 2016/7/24 4:39
       Re: A15 piston-to-bore clearance TexasMidget 2016/7/24 4:35
       Re: A15 piston-to-bore clearance Rallytwit 2016/7/26 2:49




You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]