Matthew those are the Wilwood assmeblies I was referring to. The are not really expensive but after you buy a pair of master cylinders and fab up the bracket to mount it in a production car the price adds up. For someone like me who doesn't really need the brake balance bar the Wilwood and Tilton set ups are a bit of overkill.

What I was looking for is something that uses the stock pedal but has a bracket and linkage that would allow the stock master cylinder to be turned 180 degrees (mounting it on the driver side of the firewall) so people like me who do not weld would have a bolt in solution for moving the brake master. I would like the brake master out of the way so that I can build a proper air box. Even with the flat slide carbs the master is still semi in the way.

Tom