Hey guys been trying to search the forums and wiki for some more information about an amr500 setup

I have one laying around and am considering setting it up which doesn't seem like it should be too hard to fap up a bracket and make a tensioner setup run my 32/36 carb with already bigger jetting on blow through run fuel pump surge tank and change the timing curve and retard it like any forced induction

But my query is do these amr500 really make a whole lot of power being to be placed on a more than moderate built A15 and from what I can tell from the pulley specs and other sites will make around 5psi on the stock pulley (I really have no clue what psi it would make just a guess)

But setup as blow through with the moderate work on the engine am i really going to see much gain being how small the supercharger is have many people run some decent power from them?

Is a guess around 130-140rwhp plausible with approx 10psi from one or is it just going to be easier to just put the t28 turbo on and make the same power easily

I'm more wanting to put the supercharger on to be different but if it's too small would an sc12/14 be a better option