Browsing this Thread:
1 Anonymous Users
|
|
Re: MSD6AL woes. |
|
Quite a regular  
Joined:
2013/9/3 9:44
From Cairns, Far North QLD, Australia
Group:
Registered Users
|
Alright, sorry for the late reply fellas. Cadet1200 I removed the ballast whilst wiring up the MSD as its job is too supply the coil with the correct voltage and not the ballasts. As for your recommendation DD I had the original 12V ON wire and the original 12V START wire going into a Y shaped adapter and then too the red wire of the 6AL. It still didn't work with this method. I also know the Blaster 2 is compatible with the 6AL so its not a problem. I'm still running the original points dist so that could be the problem. Otherwise I'll wire it up too the HOT wire from the key barrel and put it on a switch so it doesn't drain the battery.
Posted on: 2017/2/13 5:01
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
