Browsing this Thread:
1 Anonymous Users
|
|
Brake Bias |
|
Home away from home  
Joined:
2013/3/31 0:08
From Geelong, Victoria
Group:
Registered Users
|
Some of you may have read in my build thread that I am having some brake bias issues. I have the Maddat 7/8" master with R31 rears and S13 CA18 fronts with 250mm rotors. Installed a Wilwood proportioning valve which still did not reduce rears enough to stop them locking before the front (something like 50% reduction).
Going to try SR20 larger single pot with 280mm rotors to increase braking capacity at the front, before I go down this path, does anyone have any different ideas? Has anyone been through this before, or any suggestions on another brake master? I'm open to any suggestions. Cheers.
Posted on: 2017/3/1 9:37
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
