Browsing this Thread:
1 Anonymous Users
|
|
Re: CA18 Ignition Upgrade |
|
Home away from home  
Joined:
2005/3/2 7:09
From Canberra
Group:
Registered Users
|
I run a Bosch/MSD (LS1/LS6) coil setup on my CA. Actually it's more like the IGN-1A coils.
For the power you are after they are all pretty much the same. I personally don't like coil on plug due to the head soak on the coils for moderately modified engines.
There is really no need to go to CDI even with high boost levels, so save some coin and just buy LS1 coils. Mine is a race only CA with greater then 10.5:1 compression running 22+ psi boost, no need for CDI.
You should know the specs for the coils when you buy them (dwell times and voltage compensations) and tune it into the Haltech.
To get to your 240kw goal you will have to make other changes anyway. So batch them with the ignition upgrade and re-tune once.
Good luck
Bryan
Posted on: 2017/3/6 10:27
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
