Browsing this Thread:
1 Anonymous Users
|
|
Re: Anti-diesel_valve |
|
Moderator  
Joined:
2001/5/3 7:04
From 48 North
Group:
Registered Users
Contentmaster
Usermaster
|
Once you take the pin out, it will now always idle. And the wire becomes useless
The only downside is that the engine may have difficulty shutting off. It that happens, set the idle speed to factory-specification 700 rpm (or even lower) and re-adjust the idle mixture. If it still doesn't want to shut off quickly, most of us turn off the key and slowly let the clutch out (with foot on brake pedal) to stall the engine. No need to fix the valve
If you still want to restore the operation of the Anti-diesel valve (to shut the engine down when key is turned off), you can try soldering the wire back on (and then put the pin back in). Most I have seen broke off too short to reconnect
Posted on: 2017/11/6 7:22
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
