1200rallycar the aluminum bushes in the chassis and the delrin bushes in the lower part of the front shackle are brand new.

Benny I removed the pinion snubber as well.

Harry thanks for the clarification, sorry works been kind of crazy so my brain was locked on a particular definition of bind.

The way the Addco rear bar attaches is as follows: There is a u shaped bracket that is mounted by drilling two holes in the chassis rail just behind spring shackle. The ends of the sway bar clamp to the spring and use a set up like the front sway bar bushings. I'll try and get a picture up. A few years ago I actually had to shorten up the rod that went from the spring up to the sway bar eye as it was fouling on the chassis rail.

As soon as I figure out how to resize the photos on my iPad I'll post them.