User Login    
 + Register
  • Main navigation
Main Menu
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search

Advanced Search
Google Ad

Browsing this Thread:   1 Anonymous Users



Topic options
Rate Thread
View mode


D
Re: Wanted - 1 x used standard A15 piston (sample for forging supplier)
#1
No life (a.k.a. DattoMaster)
Joined:
2002/10/28 6:49
From under the Firmament LOL no twiglight effect BS
Group:
Registered Users
Posts: 10926
Offline
Im not sure thats his problem though, but its even better if bores are thin to re-sleeve for the 80mm then grout the bottom end. Sleeving is around 450-650 with hone then grouting can be done at home up to the welsh plugs. These forgies are suitable depending on compression needs eg. low comp (small chamber head)
https://www.ebay.com/itm/POLARIS-800-R ... 5hYeO82:rk:8:pf:0&vxp=mtr

higher comp (A14 crank/rods but A15 crank will need deck reclamation process to raise the deck 1 or 2mm before sleeving. A common on industrial and defunct engine blocks)
https://www.ebay.com/itm/Wiseco-Forged ... :1&vxp=mtr&frcectupt=true

Posted on: 2019/1/19 2:29
_________________
"Australia" is formed by all its geographically listed territories "including" Norfolk, Christmas & Cocos Islands. The word include excludes all else before it therefore you have no legal rights.
Transfer the post to other applications Transfer

Subject Poster Date
     Wanted - 1 x used standard A15 piston (sample for forging supplier) zigmondo 2019/1/8 20:16
       Re: Wanted - 1 x used standard A15 piston (sample for forging supplier) lamb_daiquiri 2019/1/10 9:40
         Re: Wanted - 1 x used standard A15 piston (sample for forging supplier) dattoman_1000 2019/1/10 11:45
         Re: Wanted - 1 x used standard A15 piston (sample for forging supplier) zigmondo 2019/1/15 6:23
           Re: Wanted - 1 x used standard A15 piston (sample for forging supplier) zigmondo 2019/1/15 6:29
             Re: Wanted - 1 x used standard A15 piston (sample for forging supplier) ddgonzal 2019/1/15 7:15
       Re: Wanted - 1 x used standard A15 piston (sample for forging supplier) D 2019/1/10 14:43
         Re: Wanted - 1 x used standard A15 piston (sample for forging supplier) ddgonzal 2019/1/11 6:42
           Re: Wanted - 1 x used standard A15 piston (sample for forging supplier) zigmondo 2019/1/15 6:18
       Re: Wanted - 1 x used standard A15 piston (sample for forging supplier) D 2019/1/15 15:39
         Re: Wanted - 1 x used standard A15 piston (sample for forging supplier) zigmondo 2019/1/15 20:07
           Re: Wanted - 1 x used standard A15 piston (sample for forging supplier) D 2019/1/16 6:26
       Re: Wanted - 1 x used standard A15 piston (sample for forging supplier) Rallytwit 2019/1/17 3:24
         Re: Wanted - 1 x used standard A15 piston (sample for forging supplier) nickmitty 2019/1/17 10:25
           Re: Wanted - 1 x used standard A15 piston (sample for forging supplier) D 2019/1/19 2:29
             Re: Wanted - 1 x used standard A15 piston (sample for forging supplier) zigmondo 2019/1/21 0:50
               Re: Wanted - 1 x used standard A15 piston (sample for forging supplier) D 2019/1/21 3:01




You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]