User Login    
 + Register
  • Main navigation
Main Menu
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search

Advanced Search
Google Ad

Browsing this Thread:   1 Anonymous Users



Topic options
Rate Thread
View mode


ddgonzal
Re: PCV Value A series turbo
#1
Moderator
Joined:
2001/5/3 7:04
From 48 North
Group:
Registered Users
Contentmaster
Usermaster
Posts: 31599
Offline
Quote:
can run the crank case pcv into the intake before the turbo on a turbo car as it sucks it back through the engine for emissions
Yes, you can do that. I understand the reason engine manufacturers don't do that is because it exposes the turbo to blowby gases -- which are normally not a problem but with engine wear it becomes a problem and with large boost ditto. For 10psi boost and good rings it might be OK -- but since it's up to the Engineer, I'd check with your engineer before doing anything

BMW turbo uses a catch can/PCV system along with their typically complicated PCV design

Modern Ford turbo here in USA uses a vacuum pump and catch can

Posted on: 2019/2/4 10:01
Transfer the post to other applications Transfer

Subject Poster Date
     PCV Value A series turbo thomen 2019/1/22 22:56
       Re: PCV Value A series turbo ddgonzal 2019/1/23 2:12
       Re: PCV Value A series turbo thomen 2019/1/31 20:56
         Re: PCV Value A series turbo ddgonzal 2019/2/4 10:01
       Re: PCV Value A series turbo thomen 2019/2/4 10:47
       Re: PCV Value A series turbo coxsteve 2019/2/9 8:47




You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]