Browsing this Thread:
1 Anonymous Users
|
|
Clutch/Flywheel specs for 1969 Datsun 1000 |
|
Not too shy to talk  
Joined:
2007/12/13 1:28
From Portland Oregon
Group:
Registered Users
|
Having trouble getting the right information on B10 4 speed flywheel and clutch:
Does the flywheel have step in the face for the 160mm clutch disc?
If so how much in thousandths?
What is the factory clutch disc thickness?
Owner what to keep this 43,000 mile coupe as stock as possible. Not willing to do the A12 flywheel, clutch and transmission swap.
Problem started with worn/slipping original clutch disc, had it rebuilt to A12 specs,as that was that we could find. Still slipped, resurfaced flywheel, machine shop did it without a step. Reassembled- slipped. Had .015" step machined in flywheel, still slips!
Found A10 pressure clamping force in Wiki Tech - 320kg, machine shop says that part is good. We are in the Portland Oregon USA area and have run out of ideas on the solution to this problem.
Specifications/Information would be greatly appreciated car as coming up for sale.
Posted on: 2019/3/2 15:00
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
