User Login    
 + Register
  • Main navigation
Main Menu
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search

Advanced Search
Google Ad

Browsing this Thread:   1 Anonymous Users





ddgonzal
Re: Swap: A15 for A14 crankshaft
#1
Moderator
Joined:
2001/5/3 7:04
From 48 North
Group:
Registered Users
Contentmaster
Usermaster
Posts: 31599
Offline
Quote:
86-87 Acura Integra pistons come in a flat top with a 30mm pin height
30 mm pin height is what the A15 uses. The A14 has 32.5 pin height

So maybe you can simply use the A15 crank in the A12A block. Use your dremel to add the side notches that the G34 (A14/A15) block has to clear the crank throws. Use the A15 oil pan as it has the corresponding slight bulges for the crank throws, it has the same sump as A12

Posted on: 2019/9/3 22:18
Transfer the post to other applications Transfer

Subject Poster Date
     Swap: A15 for A14 crankshaft Rallytwit 2019/9/2 2:02
       Re: Swap: A15 for A14 crankshaft D 2019/9/2 7:22
         Re: Swap: A15 for A14 crankshaft nickmitty 2019/9/2 13:09
       Re: Swap: A15 for A14 crankshaft Rallytwit 2019/9/2 20:24
         Re: Swap: A15 for A14 crankshaft D 2019/9/3 6:38
       Re: Swap: A15 for A14 crankshaft Rallytwit 2019/9/3 19:50
         Re: Swap: A15 for A14 crankshaft ddgonzal 2019/9/3 22:18
           Re: Swap: A15 for A14 crankshaft ddgonzal 2019/9/3 22:55
             Re: Swap: A15 for A14 crankshaft Rallytwit 2019/9/4 2:10
       Re: Swap: A15 for A14 crankshaft D 2019/9/4 3:45
         Re: Swap: A15 for A14 crankshaft ddgonzal 2019/9/4 6:11
           Re: Swap: A15 for A14 crankshaft D 2019/9/4 6:46




You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]