Browsing this Thread:
1 Anonymous Users
|
|
Re: cuttin ute springS? |
|
Home away from home  
Joined:
2002/9/10 7:23
From Melbourne, Australia
Group:
Registered Users
|
You can also get yours re-wound (compressed) so that then they are still legal and are the height you want....
can also try suspension places..in melb theres a place that custom makes springs to any stiffness and any height...About $100 a pair fitted..
If you do cut yours, do it step by step...only cut of a half coil or so at a time...then lower and check....
If you're really worried about the spring falling out, then use cable ties on the bottom spring perch to hold them in place.
I cut mine down about 3 inches and have never had the springs fall out ever... Although l don't recommend this!!
Posted on: 2003/2/7 10:16
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
