Sorry for the delay in replying, but I've measured the steering arms I have & they seem to be 80mm spacing. Definitely left & right hand arms. I've taken off the ball joints, & they're currently getting a soak in some degreaser to get all the rubbish off them. This should half the postage costs. If you can give me a mailing address via PM, I can probably get them mailed on Friday. They will need a clean with a wire brush, & probably a coat of paint. After that they should do the job.
They'll need Sunny/Stanza ball joints & Sunny/Stanza lower control arms, unless you have late 1200 ute control arms, which used the bigger ball joint. Stanza ball joints seem to have more offset, meaning wider track & negative camber.