Browsing this Thread:
1 Anonymous Users
|
|
Broken piston rings |
|
Just can't stay away 
Joined: 2015/3/22 7:42
From melbourne
Group:
Registered Users
|
Have a slightly worked a12 with a cam and h89 head and this is the second time i have broken the top compression rings.
The first time i suspect due to running to much timing. But when replaced the rings i put the timing back to factory 8 degrees and i just took the engine apart to put in some flat top pistons and all rings where good except cylinder 4 top ring was broken again.
Is this caused by detonation? Engine revs to 7500-8000rpm every know and then do i have to run less total timing then factory for these rpms?
Realy want to figure this out before putting the flat tops in and upping compression.
Posted on: 2019/12/14 11:08
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.