Browsing this Thread:
1 Anonymous Users
|
|
Re: Broken piston rings |
|
Home away from home  
Joined:
2001/2/12 12:02
From Stone Age somewhere in U.S.A.
Group:
Registered Users
|
Take a look at a few other things, it's possible that it broke during installation as in your ring compressor didn't fully compress the rings and the ring caught on the lip and got broken while being installed. Another thing to look at is if there is a ring ridge in the cylinder walls, Nissan blocks are hard and don't usually need a rebore from wear, but I have seen it happen on occasion. And as a last thought if the rings are too large for the bore as in insufficient gap when installed will cause rings to break, check the ring gap before installing them on the piston. Good luck.
Posted on: 2019/12/14 16:12
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
