Looks like it has two vacuum bosses, one already drilled & tapped for a fitting, the other one not

OOPS, won't fit the 1200's cylinder head unless you drill a center hole in each flange



will it fit with the stock cast iron exhaust manifold? Or will it require tubular headers/extractors


eBay $665 dual-pattern version, including all the small parts so no scrounging, no accepting "kinda works" -- everything just works, including insulator gaskets linkage, fasteners

Attach file:

---

  a round ports x2 DCOE.jpg (182.26 KB)


  b shaft-type throttle linkage.jpg (193.96 KB)


  c vacuum fitting plug.jpg (192.59 KB)


  d throttle cable.jpg (181.28 KB)


  e new bolt pattern +old pattern.jpg (154.40 KB)


  f thick flanges.jpg (181.23 KB)


  g heat insulating, vibration isolators.jpg (157.51 KB)


  h insulator packing.jpg (143.02 KB)


  i linkage.jpg (176.34 KB)


  j adjustable links.jpg (192.62 KB)


  k studs & nuts.jpg (186.82 KB)


  l nuts, flat washers , lock washers.jpg (137.99 KB)