Anyone ever heard of, seen or know about A15 pistons 12010-H9714? My understanding is these are 76mm bore, 30mm height and _only_ 1mm dish. A web search turned up just one dealer somewhere in Thailand who has some. There must be more.

Anyone ever try: Honda Accord 79-83? The details are: 77mm bore, 28mm height, 17mm pin and flat top. The trick here would be to rebore the pin bores to 19mm, w/ all the extra coming off the bottom of the bore. That'd raise the compression height to 29mm, which'd leave 1mm to come off the block.

Also there's KB/Silvolite #3305 (GB15, I think) 75.5mm bore, 1.133"=28.78mm height, 18mm pin. These are flat tops with valve reliefs. Offset boring the pin (towards the bottom) to 19mm would give a height of 29.28mm, and a .72mm=.030" block skim.
Of course these'd only be usefull at the 1mm oversize 76.5mm -- if the block would clean up.

Crazy, stupid, xlnt or what?

Thanks in advance.

Jack