Browsing this Thread:
1 Anonymous Users
|
|
Re: Car won't start |
|
|
Just popping in
Joined:
2003/4/14 3:32
Group:
Registered Users
|
OK
The 10 amp wire wont cause a problem.
Basically (correct me if im wrong) this wire on the back of the dizzy is the main power feed for the points.
Its a 12 volt power feed going through the ceramic resistor and throught the coil.
One way to test this is to check there is a voltage at the end of this wire.
Use a multimeter... or even shove a screwdriver in the end of it and earth it against the motor....
No Spark - Problem - trace the wire back until you get a spark.
Spark - check condensor and points.
failing that, take it to an auto electrician and see if you can give you some advice for free.
Posted on: 2003/9/16 0:48
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
