D I don't know if I told you now I tubbed the wagon so I could fit the wheels I want
( 15" x 7" ) without them scrubbing on the inside. To do this I moved the rails in one and a half inches on each side.
To fit the diff I didn't need to mod anything, but I wanted my wagon to sit low, so the plate on the rails where the bumpstops are designed to hit I removed to give about an extra inch of free travel, plus with repositioned bumpstops I get about 2 inches more travel.
With the car sitting this low and with this extra travel the diff centre would come into contact with the floor, so I raised the floor over the diff 1 inch. ( Like you see on
mini trucks)

With all these mods the car doesn't sit below legal height ( the centre of the headlights are 600mm from the ground and under the car nothing is lower than 100mm.
The car also sits level, ( not like a mad gemini
with no springs in the back))

Right now the wagons on the rotisserie cleaning up the welds in the wheel arches and prepairing the undercarrage for painting.
I will take pics but I don't have a digital camera so the pics might be a while.

Cheers Steve