Browsing this Thread:
1 Anonymous Users
|
|
pulled head? off A15 for jetboat |
|
|
Just popping in
Joined:
2004/5/14 15:27
From Nelson Bay (NSW)
Group:
Registered Users
|
Hi guys i just pulled the A15 head off and tryed to match it with the info from teck section but cant? My head is a oval port head with the only numbers on it (under valve tran) are 109 on one end and 168H on the other nothing else. the vavles are E 30mm and the IN 37mm the other thing that puts me off is the water holes were the inlet manafold goes are only two 3mm holes on one side and one on the other? every pic ive seen in here looks like its about 10-12mm hole is this a standard head or not and should i drill the water holes out or leave them alone. it also has the kidney shape chambers thanks guys
Posted on: 2004/5/18 17:16
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
