Finally after much pain and suffereing I have got the hubs made for my brake kits
I have emailed or spoken with the people who expressed interest in the past and am waiting replies to see how many people want them
At this point in time I am still waiting on 2 people to confirm their intentions
So at this point in time I have enough components to put together kits for 2 cars
I am getting more brackets laser cut soon so I can supply enough for another 5 cars

I have just fitted up the first set from this batch to my wagon and run the car over the pits as I got a yellow sticker on it and it passed first time. The guy commented on the brakes but didn't mention anything about brakes tests or engineering and he liked the way it stopped.

Kits will only be available complete and won't be sold piece by piece as in the past.So please don't ask for hubs and brackets only at this stage.
So what you get in the kit are these basic components (your only additional options are better discs , pads ,braided hoses. For coupe owners you won't need the additonal pipes -$30 from the kit cost)
Hubs are K1050 steel and are a machined finish.
Brackets are laser cut from 10mm steel plate and are "natural" finish
You could plate these items if you really wanted to I guess.

Discs x 2 (RDA brand)
Pads (Bendix GCT)
Hubs x 2
Brackets x 2
Master cylinder + pushrod
Brake pipes,joiner,blanking plug
Front rubber hoses x 2
Bolt kit
Rear wheel cylinders x 2
Rear rubber brake hose (might as well do it while your under there)
Front wheel bearings x 2
Caliper kits to overhaul calipers (you still need to supply these - off KC laser)
You'll also need to get yourself 500ml of brake fluid

Cost $ 976 plus post (ex Perth)
If you want slotted discs add $75
If you want Bendix Ultimate pads add $55
If you want braided stainless hoses add $100

email me at dattoman_1000@yahoo.com.au if your interested

Neil