Browsing this Thread:
1 Anonymous Users
|
|
sway bar questions...... |
|
Home away from home  
Joined:
2004/7/22 4:52
From Seattle ,WA.
Group:
Registered Users
|
I'm installing a B210 20MM bar instead of the 17MM stock 110 version, the problem comes with the 210 (120?) bushings & bolt. How critical is the height of the bolt, the spacer & the bushes themselves?
laying the 210 bush setup next to the 110 setup - its about 1"+ higher then the 110 stock ones, I've gotten some shorter bolts that match the height of the original 110 bolts but then the space between the bushings is only about a 1/2" to 3/4" - do I shorten both the bolt & the spacer or does somebody have a tried and true method for this upgrade?
BTW - the stock 110 bushings are not available over here otherwise I'd use those & the originals I have are shot.
Has anyone ever made bushings to match the stock 110 ones?
Any idea's would be appreciated!
Thanks, Evan
Posted on: 2010/12/6 3:52
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
