Hi all,

I have a few questions in this.

The first one is I've read all vehicles 1990 or so and newer were built to be compatible with high ethanol content fuel (components at least, not necessarily tuning). So, if I were to go to the shop (please suggest which one) and ask for some 8mm steel fuel line would it be plastic lined/ compatible with e85.

The second one is around modding the coupe tank to fit baffles and an efi pump. I've read that the tanks of this era are coated in terne (basically lead-tin solder). I know others have modded the tanks before and I guess I want to know if they've had any corrosion problems after welding it back up. Or, was some kind of tank sealant used?

Also, how hard was welding up the tank again with a lap join? I'm thinking while I'm at it I may as well add a bit to increase the capacity so two full length lap welds. Before I cut it up it would be nice to know the guage (thickness) and how likely it is to burn up.

Not entirely sure whether I'll go e85 yet but I'd like to make it compatible.

Cheers