CA18 t25 turbo needs seals $100ono
4 original coil pack for ca18det in good nick $30ea
standard dump pipe for ca18det $20
Cheers Luke

Do you have the "powervalve" section of the intake manifold ?

It's the section that's between the plenum and the intake side of the head.

I'm considering making my own plenum, and need to "buy or borrow" that part to use as a template to build the plenum.

Anyone else feel free to offer

can you post a pick of that bit you need chris i think i no which bit you need but a pic would be good.

Chris I have a spare one if you want it??? how urgent do you need it??? I can post it too you or when im down in a few weeks can drop it off.
Cheers Andrew

PS: sorted the O2 problem I had Id forgoten i had removed the o2 wire from ecu to use as aux function. Ive wired it correctly now and all is good just have to fit my 700cc injectors and boost it up

Chris i should have one mate, e-mail though if you want it so i don't miss this thread, i can bring it to the SDC meeting if your going

You guys! That'll be great.

I really only need to borrow it. I plan to make flange templates from. So I don't have to pull my engine apart.

I'm considering making a quad throttle body manifold. Or maybe a F1 style barrel throttle body. Similar to: http://www.lumenition.com/roller.pdf

Jon, if you could do without it for 6 months, that'd be good. If you could remember it for the meeting, that'd be great. I basically need to make a template of both sides, the 4 holed and the 8 holed side.

I might choose to modify it, and swap it out for the one I have currently on my engine. Which I can return to you when I'm done.

Thread Hijackers

What size is the std dump pipe,and do you know what the seal is worth for that turbo.

ta joe