Hi Guys, anyone in or neer geelong have a set of 14" or 15" rims i could borrow, i will pay for the inconvenience in beer or cash.

I need them for about a week for engineering as my 15's run spacers (no good for engineering) and my 12" rims dont fit over my brakes.

The offset I need is between +17 and +23 and the rim width cant be over 6", and the narrower the tyres the better.

any help would be appreciated!!

Cheers guys

ive got some 200b 14 x 5 inch steelies but no tyres currently, trying to find 2ndh hand set of 175 65 14 or 165 65 14 (for fronts).

if you can find an ok set of tyres cheap you can borrow and i can buy the tyres off you as the loan ;)

most yaris and jazz run 175 65 14 in yokies or bridgestones... but most 2nd hand expensive in melbourne. might be cheaper in geelong area

im talking 2nd hand ones under 100 a set ;)

in melbourne

I can sell you a set of pepperpots that have good clearance for older datsuns. 15x6 I think. $200.

unfamilia you have PM.

Revhead, do they have tyres? if so size? and as for offsets i have a different diff and front brake config, so would it be possible to get an accurate one? or the back and front space and i can calclate the offset

Cheers

As for tyres, none of the rims I have here have tyres. I don't know how to measure offset. What struts/brakes do you have? I have some trx rims also for $80

have a look here http://www.rims-n-tires.com/rt_specs.jsp it shows how all the measurements work

try are about +30 from memory. pepperpots would be about +25ish... tyres for 15 2nd hand in 195 55 15 or 195 50 15 about 45 each... but might cause some scrubbing.

Thanks! especially to unfamilia and revehead001, for assistance in this.

But i decided to bit the bullet and get some custom offset superlites.
As i figure if i go to all the trouble of engineering i may as well have the wheels done too, and have a 100% legal car

thats right, best to do 100%, i never do but will when i go L power