User Login    
 + Register
  • Main navigation
Main Menu
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search

Advanced Search
Google Ad

Browsing this Thread:   1 Anonymous Users





matty
Clutch Throwout Bearing Query
#1
No life (a.k.a. DattoMaster)
Joined:
2003/3/28 14:44
From brisbane
Group:
Registered Users
Posts: 1880
Offline
Hi all
Do both 4 and 5 speed 60 series gearboxes use the same throwout bearing?
The box is behind an A12 if that is of any relevance.
Thanks Matt

Posted on: 2009/8/6 12:46
_________________
1985 CA18DET Datsun 1200 ute
1969 A12 Datsun 1000 coupe
Transfer the post to other applications Transfer


Dundee1000
Re: Clutch Throwout Bearing Query
#2
No life (a.k.a. DattoMaster)
Joined:
2003/2/10 5:17
From Freo
Group:
Registered Users
Posts: 3318
Offline
yes the bearings are the same,
some early A12's have the smaller diameter ones, and A10 ones are small..

Posted on: 2009/8/6 12:54
_________________
'68 Thou Wagon,(home now) up and running
'69 2 door project, the yellow thing,
A12A Project motor, for the yellow thing.
A15 PSI Project Motor
'72 CB750k,
Transfer the post to other applications Transfer


juniorjay
Re: Clutch Throwout Bearing Query
#3
Home away from home
Joined:
2009/3/21 22:22
From illawarra, nsw australia
Group:
Registered Users
Posts: 284
Offline
yes,, the length of the bearing carrier varies between 56 and 60 but bearing is the same

Posted on: 2009/8/6 13:02
Transfer the post to other applications Transfer


matty
Re: Clutch Throwout Bearing Query
#4
No life (a.k.a. DattoMaster)
Joined:
2003/3/28 14:44
From brisbane
Group:
Registered Users
Posts: 1880
Offline
Thanks guys

Posted on: 2009/8/6 13:21
_________________
1985 CA18DET Datsun 1200 ute
1969 A12 Datsun 1000 coupe
Transfer the post to other applications Transfer


ddgonzal
Re: Clutch Throwout Bearing Query
#5
Moderator
Joined:
2001/5/3 7:04
From 48 North
Group:
Registered Users
Contentmaster
Usermaster
Posts: 31599
Offline
I'm not convinced.

Same year 56 and 60 boxes use the same carrier. I think the difference is early engine vs older. They added a 3 mil engine plate at some point, and the carrier is 3 mm different. Datsun 1200 engines don't have a plated bolted to the rear of the engine.

Perhaps if you have the wrong carrier, just remove or add the engine plate to compensate?

Posted on: 2009/8/7 2:59
Transfer the post to other applications Transfer






You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]