ok are the L series stumpy clutch forks same for the 5 speed and the 4 speed from a stanza?

also are the bolts that hold the engine to the block the same or similar for a and le series, if not soes any one have some spare in melbourne by tuesday night? or the length and thread pithch of them so i can get some

also does any one have the 50mm cltuch bearing carier for the L series 5 speed stumpy?

sort of need asap.(by weds at latest)

clutch forks yes i swapped one off that sticky stanza box to the stumpy. Am removing Auto bolts from L20b can send all the bolts off that express post including starter motor ones. Bearing carrier maybe i have one sure i spotted one the other day. Will write it on me white board to remind me to check in the morning. At the least i have the bellhousing and starter bolts. Want me to express em tomorrow on me way to work ?.

well just went for a dig in the shed and raided my bolts bin, found the bolts for the gear box- well the thread pitch any way- just need the right length.

really need the carrier and bearing- 50 mm, i have a 40mm here of the 4 speed- unless they are the same?

would prefer the carrier and bolts in one hit if possible- pm sent anyway.

also i trialled boltsinto the spare head i have, any datsun bolt with a 7 stamped into its head fit and held the exhaust and inlet manifolds on- so have heaps of them lying around, so they should be ok with washers insereted as well.

also how many bearing carriers are there for these stumpy g boxes? 40 mm 50 mm? i thought there would only be 1 or 2?

well thanks to a generous member i got every thing except the thermostat bit- but i got one lined up thanks to dats andy now.

thanks to all those who helped out- also saw sandpaper sally today (1200rc car- looks nice just needs to finish ca)