hello all just pick up this little guy well i paid for it just need to go get it. its a 69/70 sunny 1000. needs a clutch and maybe brakes and a alternator. then i can get it on the road. need some new fender but i have a feeling it going to be a chore to find almost all the parts needed. so far cant find a clutch prob going to use a 210 clutch. here are a few pics from the ad. im out in alberta canada so its going to be tuff finding parts im positive.

welcome to the K club!

Looks like a nice color. You will be able to get many 1200gx mechanical
parts that can be used and even fibreglass guards from Australia.

Is it going to be an older restoration, full resto or a highly project?

ya will alot of the 1200 parts transfer over like brakes and suspension. i would love to put some disc brakes on her i have tones of first jen 300zx parts maybe i could figure something out with that. i think i am going to put a sr20det or something in it not to sure yet just want to get it road worthy and go from there but with a sr it would be alot easier with parts here

Nope
Nothing in the front suspension is compatable with any other datto
Leaf spring across the front not struts and coils

Forget the SR... too big , tall and heavy
Stick with a well tuned A series and maybe a turbo if you feel you need it

210 clutch won't fit unless you change to a 210 flywheel and gearbox too

Theres lots that can be done to these things... but being where you are will make it harder
But don't dispair... we're here to help

Nice work, is that a dead sheep behind it.. ha ha,
never seen that switch mount under the dash..

By the looks of it, its freezing there so you
should consider a a12gx motor with a14 crank.
a12a rods, e15et pistons and boost in the form
of supercharger or snail.

Nice little lamps on the font, I'd say those are the switches for the foggies.

Haha I was just about to ask how (and why) the hell you squeezed the heater in down there....but then I realised LHD....fool.

Nice rig, super rare at your part of the world. I suppose they're pretty sparse here too.

thats kinda sucks so maybe i will buy this 240 engine and trans. i cant really aford much right now thats the prob so i may have to do my own mods depending on cost and shipping. found a clutch on ebay but waiting on shipping costs from austrailia. ya its get down to -40 so it may be best to go with a fuel injected motor

If you decide to do some crazy mods with this car. Please consider selling me Radio.

PLEASE!

Vancouver B.C!

it does not have a radio i dont think im sure you can have it i will be using a modern one. where i have seen radios on there in pics mine just has a datsun logo i think. ill be coming to the island in the end of july. u wouldn't happen to have a clutch that will save me from doing a engine swap or know where in canada i can get one.