anyone have one of these they are willing to part with?
Its for my thouee supercharged a10 project, the stock manifold
just wont be up to the task.

Hey datoboy1982 is selling one on ebay at the moment. Speedway kids are making these expensive now. Poor things are all over the A10 twin pipe manifold thinking it'll breath better than the stock A12 manifold.

If you asked at the same time, you could have had this for free.

I can get a copy made up of my exhaust headers, which I must say are very nice, but that makes it very very expensive meaning you'll have to get an exhaust system to suit.

is there a difference between these and a14/a15 exhaust?

Chris,
Fancy Speedway adults and now kids making everything we have hard to get.
I dont want datoboy to miss out on making money for himself as he might need it.
What are your exhaust headers worth?
Im hoping the h89 headed A10 will make 120hp with the small 500cc aisin charger at 10psi
with a single 1.75 stromberg at 6000rpm. Maybe the custom headers would be better.

Michael,
I think they are the same minus pollution valving?
Not sure. on a side note did my unreliable friend get back to you on the coupe hubs?
If not hell need your number again as he is "hopeless". He lives round the corner from
you almost and cant get his act together. Ive been his secretary for so long and Ive told
him enough is enough, this is the last time Im chasing contact details for him and after
this he will have to donate his suzuki g16b 1000 2 door to me :)

Will have a look for exhaust, i think they are all pretty much the same vanette/a14/a15

may have turfed the coupe struts now, i moved house recently, will have a look for them too


[edit] actually are you after a12 vanette or a15 vanette exhaust??? a12 will have two bolt flange at base, a15 will have larger 3 bolt flange, picture you posted looks to be 3 bolt flange

Thanks Chris, I need the 3 flange one if possible.
Send me your phone number again and Ill pass it on.
If you do have the hubs Ill get him to get you 4 packs
of Dos X mexican beer and a slab of Melbourne Bitter
or cash, its the least he can do.

Look just like a Sunny A14 manifold less the boss for air induction.

Suppose I could get the angle grinder on all the pollution bits.
Then smooth it all out with a sanding disc. Big job but anything
for my lil K.

I don't know what mine are worth. Just thought I'd suggest it because they were custom made and fit very snug in the engine bay. But to get a new set copied by someone who know show to read and copy the bends probably wouldn't be so bad?

I don't have but recently seen at my friend's home and he were also asking to me to keep it with me.I could not keep with me at that time but I will check and inform you.You may get that without any charge.