ok im looking at giving my ute some camber ,and i need to know what camber tops i can use without buying maddat ones

was thinking s13 ,but i found a site that has blank tops that need the holes drilled to suit ,so they are a universal fit

so does anyone know what will fit ? theres a few different ones on the site and they are cheap as chips

link >>> http://stores.ebay.com/101propose/Cam ... p4634.c0.m14.l1513&_pgn=2

thinking of trying the ae86 tops they look close ,will have to do some messureing first :D

there cheap and have a steel base plate so they wont break ,might make the ute stiffer too ,not having the rubber bit as a shocky

bpro do some im pretty sure

cheers mate ill check them out !

s13 is almost perfect. you rotate them 180 deg and they fit (i had to file the dags off the fsctory bolt holes on the car with a round file)if they were fit in a s13 that would be pos camber setting.

boofhead had his machined to create more neg camber.

cheap 2nd hand or easily available new cheap too. i got t3 ones of ae86 for less than $100 new! i prefered my teins that pigdog has not though, had better bearings in them.

im running stock struts and upper spring retainers ,so will the tops youve mentioned still work / and do i need to make a spacer for the bearing bit to suit 1200 struts ?

also i checked bpro and they dont have a listing ,but i might of looked in the wrong spot !

cheers

Contact Endo San via PM or Mike.

found these ,they look ok but postage is the killer

what were yours worth nigel ?

how do the camber tops work!? do they just bolt to the top of your standard strut and wa-la you can have camber? lol

Mine replaced the original strut top and like most are adjustable for camber and castor. Cost was $275 if I remember correctly from a member of this site, very happy with them:

Attach file:

---

  camber 2.JPG (122.08 KB)