Hi everyone thinking about putting some weld draglite wheels on my ute not concerned with the back but would like to put 15x4 on the front dont want them to stick outside the gaurds what offset am i after 1.875,2.25 or 2.50.

What struts are you using? That will determine what back space you will need, the more track the bigger back space

man i know nothing compared to u guys i am getting the struts from maddat along with a whole heap of other goodies its a tose up between weld and convopros,with the convopros 44lex told me that the 2 5/16 are the go so what is close to that in the weld

Ah ok you getting the 5 stud 200b/r31 setup? The 2.25" ones are the closest to that. Best bet is to try and get a wheel off someone to test, don't do what I did and get the wrong wheels lol

hi wardy i am going with the ultamite race coilover package which is a 200b/stanza strut with 5 stud ford pattern so u think 2.25 would be the go

Pretty much the same setup as me, you will also need adjustable strut tops and lca's to bring the wheels inwards. Yep the 2.25" ones should be fine. There is only like 2mm difference between them and the 2 5/16 ones.