Where to buy? And what to get but needs to be semi slicks and 175/55/15

good luck. i had to go 175/55r15 on the front of mine for strut clearance after changing the offset. not a very common size. i only know of 3 makers in a "normal" tyre let alone semi slick. i have khumo kh11.

pm me with what you come up with.

why so skinny?

if your running 15's i'd go at least 195/50 or 205/50 if you have the room for them

+ 1 for good luck to you, not being rude, hard size to get and I'm sure the speed ratings are low, something like 140km/h. 185-55-15 should be easier to get in a slick I would say

I will be running 15x7 p8 with 240z struts with series 1 maddat rx7 series 4 brakes fc3s and need to reduce tyre size so I don't need flares just a bit of a pump and lip and off I go! On the rear I'll be running 225's plus

Use 185 55 15 or 50 profile. You will scrub those 175 out with no traction and all that power planned.

Might have to look at 185/55/15 federal 595's then

this is your best bet, http://www.importmonster.com.au/yahoo?cat=0&term=175+55+15+&page=1

Can anyone help me to get from os?

datsunbloke,
the only way to import tires is by them being on rims.Can't import tires only.

suppafato,
those sizes are hard to come by esp in slicks.just keep searching or change to different size mate

cheers