User Login    
 + Register
  • Main navigation
Main Menu
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search

Advanced Search
Google Ad

Browsing this Thread:   1 Anonymous Users





supafatto
180b master to Datsun 1200 fitting help needed
#1
No life (a.k.a. DattoMaster)
Joined:
2008/6/15 9:11
From Melbourne
Group:
Registered Users
Posts: 4504
Offline
Hi I have a Datsun 180b master I want to fit to my 1200 any ideas how to do the pin setup as the 180b master has no pin as is setup for booster, how have you's done this in the past?

Posted on: 2012/8/12 12:30
_________________
Car free
Transfer the post to other applications Transfer


dattodude
Re: 180b master to Datsun 1200 fitting help needed
#2
No life (a.k.a. DattoMaster)
Joined:
1998/12/6 1:08
From Sydney, Australia
Group:
Registered Users
Posts: 5806
Offline
Just swap over the 1200 cleavis shaft to the 180b master.

Posted on: 2012/8/12 12:43
_________________
'71 Green 1200 Sedan CA18DET Project 99.98% complete
'71 White 1200 Sedan 20,000mi + A14T (twin 40DCOE 30/70 cam, extractors)
Website: http://www.shoeys.com
Transfer the post to other applications Transfer


supafatto
Re: 180b master to Datsun 1200 fitting help needed
#3
No life (a.k.a. DattoMaster)
Joined:
2008/6/15 9:11
From Melbourne
Group:
Registered Users
Posts: 4504
Offline
Is it that easy?

Posted on: 2012/8/12 13:11
_________________
Car free
Transfer the post to other applications Transfer


dattodude
Re: 180b master to Datsun 1200 fitting help needed
#4
No life (a.k.a. DattoMaster)
Joined:
1998/12/6 1:08
From Sydney, Australia
Group:
Registered Users
Posts: 5806
Offline
I've done this on the clutch master. I don't expect the brake master to be much different. I know the bolt in between the F and R outlets holds the master cylinder piston in place. You'd have to look at your exact situation. From memory they all use a c-clips in the end. Booster or no booster.

Posted on: 2012/8/12 14:18
_________________
'71 Green 1200 Sedan CA18DET Project 99.98% complete
'71 White 1200 Sedan 20,000mi + A14T (twin 40DCOE 30/70 cam, extractors)
Website: http://www.shoeys.com
Transfer the post to other applications Transfer


supafatto
Re: 180b master to Datsun 1200 fitting help needed
#5
No life (a.k.a. DattoMaster)
Joined:
2008/6/15 9:11
From Melbourne
Group:
Registered Users
Posts: 4504
Offline
Going to run no booster

Posted on: 2012/8/12 22:43
_________________
Car free
Transfer the post to other applications Transfer


jmac
Re: 180b master to Datsun 1200 fitting help needed
#6
No life (a.k.a. DattoMaster)
Joined:
2008/10/10 22:02
From Melbourne Australia (and likely under the car)
Group:
Registered Users
Posts: 1021
Offline
mate - if you ever get time, I've got that shell sitting here still if you wanted that rear 1/4 section to cut out. I also have a few 1200 master cylinders and pedal setups here, so if you bring the 'donor' master cylinder with you, we could probably work it out quick smart.

What diameter is the 180b master cylinder bore?

Posted on: 2012/8/13 10:06
_________________
John McKenzie
Transfer the post to other applications Transfer






You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]