Browsing this Thread:
1 Anonymous Users
|
|
(4) 39mm Titanium Intake Valves |
|
Home away from home  
Joined:
2002/3/22 14:50
From St. Louis, MO USA
Group:
Registered Users
|
I have (2) more 39mm titanium intake valves for the A-series engine. 8mm stem, approximate stock length and uses stock Datsun keepers.
In addition to the (2) 39mm valves above are (3) more donor valves for blanks. The 39mm titanium valves were cut down from 46mm titanium valves. The 46mm will need to be cut down on the face. The back profile remains the same, so no back cutting or profiling is necessary. The 46mm valves are much longer (good), so you cut the keeper groove and shorten the length (easy processes in valves).
All (5) titanium valves for $USD 75 plus $20 shipping worldwide. I THINK these are the last titanium valves I've found and are the only ones with 8mm stem size.
thank you, Peter
PM is OK but email is still the best
PeterZekert ["at", replace that "at" with this => "@"] Juno.com
Posted on: 2012/11/18 18:57
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
