Hi guys. After many years of looking I finally picked up a 1200 ute in pretty good condition. Im working on tidying it up to get it rego'd. Brakes were all seized up so I put in a pair of 120Y front struts with disc brakes. They physically fit, and bolt up but the front sits way too high now. Im hoping someone can tell me what springs I can put into the 120Y struts to drop the front back to standard height or preferably a little lower than standard. Thank You.

did you put the 1200 strut tops on the 120Y struts? If not, changing them over will lower the car 30mm. Kings lowering springs will get another 30mm.

cheers. Ive been asking around and thats what everyones come up with. also using the springs from the 1200 struts as they may be shorter. will see where that gets me, take some measurements and go from there. thanks.