ok great i know nothing about the A14 Engine like i say i Brought one to rebuild and install in My Morris Minor it has had a re bore to 0.5mm ( approx 20 thou over ) i believe its bore std is 76mm and a stroke of 77mm , but one bore is shot i figured it would be cheaper to 1 ) buy a sleeve 2) remove the old one and install this one 3) re bore it to match the others that only have 5 k miles on them since they were re bored with new pistons and rings 4) buy a 0.5 mm over piston and rings to reinstall im not sure how much that will all cost ?
as a alternative i can buy a complete engine rebuild kit on a 40 thou over ( 1.0mm oversize ) for $186.0 See site (
http://www.rpmmachine.com/shop/index.php?l=product_detail&p=5216 )
and have the 4 barrels re bored to 1.0mm and use it to do the job What is the price of your sleeve im hoping it would fit as im hopeful there the same for the years they were built
Transfer
