SOLD: Lynx crossover single sidedraught manifold with 40mm DHLA Dellorto. These were only made to suit round port heads as far as I know. This one has been cut and shut with a stock A14-15 oval port manifold flange. It is missing the studs, soft mounts and filter, so it's just the manifold and carb as pictured $330



No longer for sale - both other manifolds sold so I'm going to use these A14T "GX" twin 38mm Hitachis. Manifold has been sand blasted. In pieces. Just as you see them in the picture. Missing throttle shafts, throttle plates and linkages, as well as the pollution bits - ready to be blanked off. Would suit buying a cheap set of L series Hitachis (they're the same 38mm Hitachi carb) to put on this manifold and use the A series needles & springs from these carbs in them. $250

PM sent Harry

I'll also put the Rowland big bore oval port manifold and 32/36 up for sale $450 Complete from throttle linkage to air filter. Runs great.
If it sells first, I'll fix up the Hitachis myself and run on them until I do the L16 conversion.

Attach file:

---

  Rowland32-36.jpg (192.49 KB)

Hi mate :)
On doing a B210 supercharged A12, would like the Rowland manifold if you sell it alone? Eg. For how much?
But the crossover also looks interesting!

I'm not splitting them mate. If you just want a Rowland manifold, you can try them directly in South Africa - they have a website.

Okay ill go to them source then.

single sidedraught setup sold

Ad updated. Someone made me an offer on the Rowland manifold I couldn't refuse, so I sold it separately. I'll be fixing up the twin Hitachis and using them until I do the L series conversion.

All that's left for sale is:
32/36 Weber. VGC. Runs great. Includes air filter. Has been de-choked. $250
No manifold or adapter - just the carb and air cleaner

32/36 Weber is sold too.