Browsing this Thread:
1 Anonymous Users
|
|
a12 exhaust manifold |
|
Quite a regular  
Joined:
2003/10/16 3:12
From Perth
Group:
Registered Users
|
ok, i am finally ripping off the exhaust manifold this weekend and plugging up the stupid hole form the butterfly valve in the exhaust manifold.
I am just curious on how long approximatley this will take and is there any hidden tips that anyone can give me.
i have done many an escort and gemini manifold change etc and that takes stuff all time, is the datto just as easy, except for that fact that it looks like the inlet has to come off as well to install the new gasket!!!
spew..
thanx
Posted on: 2003/11/12 8:43
|
_________________
1980 sunny std dreaming of ca18det 2000 CBR600F4 
|
|
|
Re: a12 exhaust manifold |
|
Quite a regular Joined:
2003/10/16 3:12
From Perth
Group:
Registered Users
|
well the job has been done.
Taking off the manifolds was a peice of piss, but trying to remove the valve and adjoining shaft was an abslute c#@t. after much cutting and bashing and bruised hands it is removed, the holes are plugged and all is back together in a matter of roughly 2 hours.
Though i will be probably tapping the holes and putting bolts in them if the patch up job i did eventually fails.
have fun all
Posted on: 2003/11/17 4:08
|
_________________
1980 sunny std dreaming of ca18det 2000 CBR600F4
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
