![[Datsun 1200 encyclopedia]](/wiki/upload/wiki.png)
| Revision as of 02:50, 1 July 2007 Ddgonzal (Talk | contribs) <- Previous diff |
Revision as of 01:58, 23 December 2007 Ddgonzal (Talk | contribs) Next diff -> |
||
| Line 3: | Line 3: | ||
| [http://ddgonzal.members.winisp.net/wiki/cooling/CO-01_01.JPG http://ddgonzal.members.winisp.net/wiki/cooling/CO-01_01_th.JPG] | [http://ddgonzal.members.winisp.net/wiki/cooling/CO-01_01.JPG http://ddgonzal.members.winisp.net/wiki/cooling/CO-01_01_th.JPG] | ||
| <br>Coolant Flow to Heater | <br>Coolant Flow to Heater | ||
| + | |||
| + | = Operation = | ||
| + | |||
| + | <center><table border=1 width=80% cellspacing=0><tr><td> | ||
| + | USA 1972 [[Owners manual]] (see pages 18-19 for details): | ||
| + | <br>[http://ddgonzal.members.winisp.net/wiki/om1972/ http://ddgonzal.members.winisp.net/wiki/om1972/thumbs/00_cover.jpg] [http://ddgonzal.members.winisp.net/wiki/om1972/18.jpg http://ddgonzal.members.winisp.net/wiki/om1972/thumbs/18.jpg] [http://ddgonzal.members.winisp.net/wiki/om1972/19.jpg http://ddgonzal.members.winisp.net/wiki/om1972/thumbs/19.jpg]<blockquote><hr>Comfort and Convenience<hr></blockquote></td></tr></table> | ||
| + | </center> | ||
| + | |||
| + | == No-heater models == | ||
| + | Ventilation for models originally equipped with No Heater. | ||
| + | |||
| + | <center><table border=1 width=80% cellspacing=0><tr><td> | ||
| + | USA 1972 [[Owners manual]] (see pages 18-19 for details): | ||
| + | <br>[http://ddgonzal.members.winisp.net/wiki/om1972/ http://ddgonzal.members.winisp.net/wiki/om1972/thumbs/00_cover.jpg] [http://ddgonzal.members.winisp.net/wiki/om1972/18.jpg http://ddgonzal.members.winisp.net/wiki/om1972/thumbs/18.jpg] [http://ddgonzal.members.winisp.net/wiki/om1972/19.jpg http://ddgonzal.members.winisp.net/wiki/om1972/thumbs/19.jpg]<blockquote><hr>The valve has only thre positions: CLOSE, HALF OPEN and FULLY OPEN<hr></blockquote></td></tr></table> | ||
| + | </center> | ||
| + | |||
| + | TIP: Pull heater level out to switch fan speeds. | ||
| + | |||
| = Heater Inspection = | = Heater Inspection = | ||
Revision as of 01:58, 23 December 2007
Heater was optional in the Standard model for most countries. All USA models came with a heater (by law).
Coolant Flow to Heater
Operation
|
USA 1972 Owners manual (see pages 18-19 for details):   
|
No-heater models
Ventilation for models originally equipped with No Heater.
|
USA 1972 Owners manual (see pages 18-19 for details):
|
TIP: Pull heater level out to switch fan speeds.
Heater Inspection
Heater core:
- Leaks (before removing, check for leaks in passenger area, under carpet, on firewall cardboard, etc)
- Flow (ensure it is not plugged). You can test similar to radiator blocked test
- Clean out debris in exterior of core
Hoses: Check for cracks, overly soft hoses, tight clamps
Flow valve: ensure it opens & closes easily through entire range. Also check linkage for easy and complete movement (before taking apart)
Air ducts: Ensure they are clean and connected properly
Electrical: Ensure fan spins at both High & Low speed
Coolant Thermostat: Test