Fuel tank

(Difference between revisions)

Revision as of 20:50, 28 January 2009

Also see: Fuel Cap

Fuel Sender

The fuel level sender.

Specifications

As measured by club members, by moving the float up and down from stop to stop:

• 12 ohms fully up
• 88 ohms fully down

NOTE: This does not necessarily match "Full" and "Empty" marks of the fuel gauge.

Reference: Forum: Fuel sending unit specs

Also see: Fuel Gauge (includes Fuel gauge specs)

Parts Sources

• Nissan. Call Ericksen Nissan's toll-free number. If Ericksen says they can't get a part let us know (click "Edit" and add it to this article). Also, if they do get the part for you, let us know that too!
  • NOTE: Nissan USA is out of stock forever of the Sedan hose. But perhaps they can get the Coupe hose.
• Wreckers, if you can find a 1200 in a wrecking yard
• Friends with parts cars
• Marine supply stores, for general fuel hose and filler hose. NAPA and other old-line auto parts store carry this generic fuel-rated hose also. Trimmed to length using the old filler hose as a guide. It is tough getting it to flex into shape, but can be done.

Filler Hose

Note that the USA B110 sedan tank uses a 2-piece filler hose (there's a small hose inside the bigger one). This is for the EVAPO (emissions market) vehicles:

Two-piece curved filler hose for EVAPO system

This hose is NLA (No Longer Available) in US, Canada or Japan. However, the regular single hose can be fitted as follows:

Straight one-piece filler hose for non-EVAPO system

The hose looks like this:

Filler Hose Comparo

Filler Modifications

Discussions:

• Need Fuel Tank!!