![[Datsun 1200 encyclopedia]](/wiki/upload/wiki.png)
| Revision as of 07:17, 18 May 2012 ddgonzal (Talk | contribs) (->Rear) <- Previous diff |
Current revision ddgonzal (Talk | contribs) |
||
| Line 1: | Line 1: | ||
| Wheel Studs and lug nuts for Datsun 1200 are M12x1.25 thread. Nuts are 19mm hex head (~3/4 inch). | Wheel Studs and lug nuts for Datsun 1200 are M12x1.25 thread. Nuts are 19mm hex head (~3/4 inch). | ||
| - | Discussion: [http://datsun1200.com/modules/newbb/viewtopic.php?topic_id=32857&forum=1 extra long wheel stud info] | + | Discussion: [http://datsun1200.com/modules/newbb/viewtopic.php?topic_id=32857&forum=1 extra long wheel stud info] |
| = Specifications = | = Specifications = | ||
| Thread: M12 x 1.25 | Thread: M12 x 1.25 | ||
| - | == Front, Disc Brakes == | + | Torque: 8.0-9.0 kg/m (58-65 ft-lb) |
| - | * Head Code: 240 | + | <br>from the 1978 B120 factory service manual (English RHD/LHD) |
| - | * Knurl Diameter: 13.00mm | + | |
| - | * Thread Pitch: Right | + | |
| - | * Shoulder Length: 10mm | + | |
| - | * Thread Size: M12-1.25 | + | |
| - | * Length: 32mm | + | |
| - | * Type: Serrated Stud | + | |
| - | == Rear == | + | Drum (clip head) VS Disc (round head) |
| - | * Nissan Part Number 40222-18000 BOLT-HUB ROAD WHEEL (B110 & B120) | + | <br>{{Album|25002}} |
| - | * Head Code: 242 | + | |
| - | * Knurl Diameter: 12.56mm | + | {{Photo!|LugStudGuide.jpg}} |
| - | * Thread Pitch: Right | + | |
| - | * Shoulder Length: 11.5mm | + | == Disc Brakes == |
| - | * Thread Size: M12-1.25 | + | * Head Code: 240 |
| - | * Length: 37.5mm | + | * Knurl Diameter: 13.00mm |
| - | * Type: Serrated Stud w/Clip Head | + | * Thread Pitch: Right |
| + | * Shoulder Length: 10mm | ||
| + | * Thread Size: M12-1.25 | ||
| + | * Length: 32mm | ||
| + | * Type: Serrated Stud | ||
| + | |||
| + | == Drum == | ||
| + | * Nissan Part Number 40222-18000 BOLT-HUB ROAD WHEEL (B110 & B120) | ||
| + | * Head Code: 242 | ||
| + | * Knurl Diameter: 12.56mm | ||
| + | * Thread Pitch: Right | ||
| + | * Shoulder Length: 11.5mm | ||
| + | * Thread Size: M12-1.25 | ||
| + | * Length: 37.5mm | ||
| + | * Type: Shoulder Stud w/Clip Head | ||
| = Part Numbers = | = Part Numbers = | ||
| Line 30: | Line 38: | ||
| == Front, Disc Brakes == | == Front, Disc Brakes == | ||
| - | * Nissan 40222-22001 BOLT-hub (for disc brake) | + | * Nissan 40222-22001 BOLT-hub (for disc brake) |
| - | * Dorman 28321 (Head Code N) | + | * Dorman 28321 (Head Code N) |
| - | * Dorman 610-240 (610240)/610-2401/98320/983201 | + | * Dorman 610-240 (610240)/610-2401/98320/983201 |
| - | * Wagner/Guardian/One Source BD60980 [knurled] at [http://www.rockauto.com/catalog/x,carcode,1208483,parttype,7680 RockAuto] | + | * Wagner/Guardian/One Source BD60980 [knurled] at [http://www.rockauto.com/catalog/x,carcode,1208483,parttype,7680 RockAuto] |
| - | * Raybestos 27792B [knurled] | + | * Raybestos 27792B [knurled] |
| + | Stock Fits | ||
| + | * 1971-1973 Datsun 1200 | ||
| + | * 1980-1981 Datsun 810 | ||
| + | * 1970 Datsun 2000 | ||
| + | * 1974-1975 Datsun B210 USA | ||
| + | NOTE: 1976-1978 uses 40222-A0800 | ||
| + | * 1974-1978 Datsun 120Y (A12-powered B210) | ||
| + | * 1984-1986 Nissan 200SX | ||
| + | * 1986-1994 Nissan D21 Pickup | ||
| + | * 1979-1982 Datsun 210 | ||
| + | * 1976-1978 Datsun F10 | ||
| + | * 1970-1973 Datsun 240Z | ||
| + | * 1998 Nissan Frontier | ||
| + | * 1974-1975 Datsun 260Z | ||
| + | * 1982-1984 Datsun Maxima | ||
| + | * 1975-1978 Datsun 280Z | ||
| + | * 1987-2006 Nissan Pathfinder | ||
| + | * 1979-1983 Datsun 280ZX | ||
| + | * 1995-1997 Nissan Pickup | ||
| + | * 1984-1986 Nissan 300ZX | ||
| + | * 1983 Nissan Pulsar | ||
| + | * 1968-1973 Datsun 510 | ||
| + | * 1983-1986 Nissan Pulsar NX | ||
| + | * 1973 Datsun 610 | ||
| + | * 1982-1986 Nissan Sentra | ||
| + | * 1977-1979 Datsun 620 | ||
| + | * 1982-1986 Nissan Stanza | ||
| + | * 1980-1986 Datsun 720 | ||
| + | * 2000-2006 Nissan Xterra | ||
| + | * 1997-2003 Infiniti QX4 | ||
| - | Stock Fits | + | Head Code N Fits |
| - | * 1971-1973 Datsun 1200 | + | * 1972-1973 Datsun 1200 |
| - | * 1980-1981 Datsun 810 | + | * 1984-1988 Nissan 200SX |
| - | * 1970 Datsun 2000 | + | * 1986 Nissan 720 Pickup |
| - | * 1974-1975 Datsun B210 | + | * 1986-1993 Nissan D21 Pickup |
| - | * 1984-1986 Nissan 200SX | + | * 1987-1993 Nissan Pathfinder |
| - | * 1986-1994 Nissan D21 Pickup | + | |
| - | * 1979-1982 Datsun 210 | + | |
| - | * 1976-1978 Datsun F10 | + | |
| - | * 1970-1973 Datsun 240Z | + | |
| - | * 1998 Nissan Frontier | + | |
| - | * 1974-1975 Datsun 260Z | + | |
| - | * 1982-1984 Datsun Maxima | + | |
| - | * 1975-1978 Datsun 280Z | + | |
| - | * 1987-2006 Nissan Pathfinder | + | |
| - | * 1979-1983 Datsun 280ZX | + | |
| - | * 1995-1997 Nissan Pickup | + | |
| - | * 1984-1986 Nissan 300ZX | + | |
| - | * 1983 Nissan Pulsar | + | |
| - | * 1968-1973 Datsun 510 | + | |
| - | * 1983-1986 Nissan Pulsar NX | + | |
| - | * 1973 Datsun 610 | + | |
| - | * 1982-1986 Nissan Sentra | + | |
| - | * 1977-1979 Datsun 620 | + | |
| - | * 1982-1986 Nissan Stanza | + | |
| - | * 1980-1986 Datsun 720 | + | |
| - | * 2000-2006 Nissan Xterra | + | |
| - | * 1997-2003 Infiniti QX4 | + | |
| - | + | ||
| - | Head Code N Fits | + | |
| - | * 1972-1973 Datsun 1200 | + | |
| - | * 1984-1988 Nissan 200SX | + | |
| - | * 1986 Nissan 720 Pickup | + | |
| - | * 1986-1993 Nissan D21 Pickup | + | |
| - | * 1987-1993 Nissan Pathfinder | + | |
| - | + | ||
| - | === Extra Long === | + | |
| - | * NISMO 40222-A0220 [2" long/51mm] | + | |
| - | ** For A-series front, 510, rear of FWD models, many more | + | |
| - | + | ||
| - | + | ||
| - | Would this work? 12.9 instead of 13.0 mm knurl. The 510 and Z-car guys use them to replace the front lugs (which are the same as B110). | + | |
| - | * 40222-15C01 GC22 Van $2.12 USD each | + | |
| - | * 43222-0B001 V40 Quest $9.47 USD each | + | |
| - | * NAPA/Balkamp 6412785 $2.29 USD each | + | |
| - | * Dorman 610-403 (610403) [http://www.rockauto.com/catalog/x,carcode,1212523,parttype,7680 $1.34 Rockauto] | + | |
| - | Type: Serrated Stud | + | |
| - | Thread: M12-1.25 | + | |
| - | Knurl Dia.: 12.90mm | + | |
| - | Length: 45.5mm | + | |
| - | Shoulder Length: 15mm | + | |
| - | * Infiniti J30 front 1995-93 | + | |
| - | * Nissan VAN Front 1988-87, From 1/88 | + | |
| - | * Nissan QUEST Rear 1998-93, From 1/88 | + | |
| == Rear == | == Rear == | ||
| Line 110: | Line 100: | ||
| * B310 | * B310 | ||
| - | = Nuts = | + | == Extra Long == |
| - | Lug Nuts for steel wheels | + | NISMO Long Hub Bolts 13.0 mm knurl |
| + | Front S13 | ||
| + | * 40222-RS010 50 x 8 | ||
| + | * 40222-RS020 60 x 8 | ||
| + | Rear S13/S14 | ||
| + | * 40222-RS015 50 x 10 | ||
| + | * 0222-RS025 60 x 10 | ||
| - | * Nissan 40225-27700 NUT-ROAD WHEEL | + | Buy at [[Bprojects]] |
| - | * NISMO 40224-R1120 NUT/TAPERED | + | * HKB Sports Racing 47 mm studs |
| - | * RAYBESTOS Professional Grade 10018N | + | * For disc hubs or drum hubs (have notched heads) |
| + | {{UploadPost|174_56aae20396176.jpg|475922}} | ||
| - | [http://datsun1200.com/modules/myalbum/photo.php?lid=21811 http://datsun1200.com/uploads/photos/21811.jpg] | + | NISMO 40222-A0220 [2" long/51mm] |
| + | * For A-series front disc, 510, rear of FWD models, many more | ||
| - | * Dorman 711406 AutoGrade/RB 711-406-005 Open End-Bulge Seat | + | NISMO 40222-H5020 [2" long/51mm] |
| - | * Dorman 611064 Autograde/RB 2029933 (09140-12026, 09159-12020, 28171XA00A, 30015781, 40225-27700, 6230 06002, 6230 06003) | + | * For A-series rear drum, front drum |
| - | ** Standard Open Nut | + | |
| - | ** Thread M12-1.25 | + | |
| - | ** Hex Size 19mm | + | |
| - | ** Length 16mm | + | |
| - | ** Seat Angle 60 deg. | + | |
| - | ** Finish Chrome | + | |
| - | * Dorman 611174 AutoGrade/RB 611-174-006 Acorn, Bulge Seat, Hex Size E | + | |
| - | * Dorman 611099 AutoGrade/RB 611-099-006 Acorn, Hex Size A, 1-pc | + | |
| - | * 40224-21001 B310 | + | 12.9 instead of 13.0 mm knurl. The 510 and Z-car guys use them to replace the front lugs (which are the same as B110). |
| - | * 40224-21001 B310 | + | * 40222-15C01 GC22 Van $2.12 USD each |
| - | * 40224-M7200 B310 Acorn style | + | * 43222-0B001 V40 Quest $9.47 USD each |
| - | * 40224-M7210 B310 Acorn style | + | * NAPA/Balkamp 6412785 $2.29 USD each |
| + | * Dorman 610-403 (610403) [http://www.rockauto.com/catalog/x,carcode,1212523,parttype,7680 $1.34 Rockauto] | ||
| + | Type: Serrated Stud | ||
| + | Thread: M12-1.25 | ||
| + | Knurl Dia.: 12.90mm | ||
| + | Length: 45.5mm | ||
| + | Shoulder Length: 15mm | ||
| + | * Infiniti J30 front 1995-93 | ||
| + | * Nissan VAN Front 1988-87, From 1/88 | ||
| + | * Nissan QUEST Rear 1998-93, From 1/88 | ||
| + | Fits S13 disk-over-hub conversion | ||
| + | S13 (1989-1994 Silvia) Studs: | ||
| + | * Dorman 610320/98350/983501/983551 (S13 Rear & Front, flat head) | ||
| + | * Head Code: 320 (19mm diameter?) | ||
| + | * Knurl Diameter: 12.83mm | ||
| + | * Thread Pitch: Right | ||
| + | * Shoulder Length: 14mm | ||
| + | * Thread Size: M12-1.25 | ||
| + | * Length: 41.5mm (~47mm overall) | ||
| + | * Type: Serrated Stud | ||
| + | Fits: [http://shop.oreillyauto.com/ProductGuide.aspx?mfrcode=DOR&mfrpartnumber=983551 Most Datsun/Nissan 1970-2006] | ||
| + | Repco S457 will fit, but are a bit longer | ||
| + | * M12 x 1.25 | ||
| + | * 12.9mm knurl diameter | ||
| + | * 43.8mm length | ||
| + | * 13.9mm shoulder | ||
| + | FITS | ||
| + | * Most Nissan-Datsun | ||
| + | * Ford Corsair 1989-1992 | ||
| + | * Holden Astra/Vectra LD 1988-1992 | ||
| - | * ALLOY WHEELS | + | Also see: Dorman 28355 (Head Code NS, rounded), some Datsun/Nissan including S13. |
| - | * NISMO 40224-E7200 NUT/SQUARE SHOULDER | + | |
| - | ** For most alloy wheels. Shank: 19mm (0.748"), Length: 14mm (0.551") | + | |
| - | * 40224-R4626 NUT SET-WITH LOCK (FOR ALMI) B310 | + | |
| - | * 40224-R4670 NUT-ROAD WHEEL,FOR ALUMINIUM B310 | + | |
| - | * Dorman 611103 AutoGrade/RB kit611-103 Mag-Short Shank | + | |
| - | * Dorman 611107 AutoGrade/RB 611-107-006 Mag-Standard (2 pc. construction) | + | |
| - | [http://datsun1200.com/modules/myalbum/photo.php?lid=21812 http://datsun1200.com/uploads/photos/21812.jpg] | + | Extra-Long Repco NS3430 |
| + | * 12.8mm knurl diameter | ||
| + | * 55mm length | ||
| + | * 9.5mm shoulder | ||
| - | == Alternatives == | + | Super Extra-long Repco Stud S4570 |
| - | Reportedly fit 1200 disk brakes. | + | * 5.3mm longer shoulder (works with S13 disk-over-hub conversion) |
| + | * 77mm long overall | ||
| + | * 72mm long minus head | ||
| + | * 12.7mm knurl diameter | ||
| + | * 19mm dia head | ||
| + | Buy at [http://niceproducts.com.au/product/s4570-long-wheel-studs nice products] | ||
| - | S13 (1989-1994 Silvia) Studs: | + | = Nuts = |
| - | * Dorman 610320/98350/983501/983551 (S13 Rear & Front, flat head) | + | Lug Nuts for steel wheels |
| - | ** Head Code: 320 (19mm diameter?) | + | |
| - | ** Knurl Diameter: 12.83mm | + | |
| - | ** Thread Pitch: Right | + | |
| - | ** Shoulder Length: 14mm | + | |
| - | ** Thread Size: M12-1.25 | + | |
| - | ** Length: 41.5mm (~47mm overall) | + | |
| - | ** Type: Serrated Stud | + | |
| - | Fits: [http://shop.oreillyauto.com/ProductGuide.aspx?mfrcode=DOR&mfrpartnumber=983551 Most Datsun/Nissan 1970-2006] | + | * 19 mm hex head |
| + | * taper seat | ||
| + | Nissan 40225-27700 B110 NUT-ROAD WHEEL | ||
| + | Nissan 40224-21000 B310 40224-21001 | ||
| + | Nissan 40224-M7210 NUT-ROAD WHEEL (FOR STYLED) [Acorn style] <> 40224-M7200 | ||
| + | NISMO 40224-R1120 NUT/TAPERED | ||
| + | RAYBESTOS Professional Grade 10018N | ||
| - | Also see: Dorman 28355 (Head Code NS, rounded), somem Datsun/Nissan including S13. | + | 40225-27700 |
| + | <br>{{Album|26301}} | ||
| - | Extra-long Repco Stud S4570: | + | * Dorman 711406 AutoGrade/RB 711-406-005 Open End-Bulge Seat |
| - | * 77mm long overall | + | * Dorman 611064 Autograde/RB 2029933 (09140-12026, 09159-12020, |
| - | * 72mm long minus head | + | 28171XA00A, 30015781, 40225-27700, 6230 06002, 6230 06003) |
| - | * 19mm dia head | + | ** Standard Open Nut |
| - | * Use with Repco Nut: NN421 | + | ** Thread M12-1.25 |
| - | [http://i30.photobucket.com/albums/c314/cheater_5/wheelstuds.jpg http://i30.photobucket.com/albums/c314/cheater_5/th_wheelstuds.jpg] | + | ** Hex Size 19mm |
| + | ** Length 16mm | ||
| + | ** Seat Angle 60 deg | ||
| + | ** Finish Chrome | ||
| + | * Dorman 611174 AutoGrade/RB 611-174-006 Acorn, Bulge Seat, Hex Size E | ||
| + | * Dorman 611099 AutoGrade/RB 611-099-006 Acorn, Hex Size A, 1-pc | ||
| + | |||
| + | == Alloy Wheel == | ||
| + | Nissan 40224-R4626 NUT SET-WITH LOCK (FOR ALMI) (4 sets per car) | ||
| + | Nissan 40224-R4670 NUT-ROAD WHEEL,FOR ALUMINIUM | ||
| + | * B310,R30,F30,E23/E24,K10,910,C31,M10,N12,S110,U11,Z31 | ||
| + | * [[Z Rims]] | ||
| + | {{Photo!|21m51fo.jpg|Datsun%201200/Parts}} | ||
| + | {{Photo!|lugnuts.jpg|Datsun%201200/Parts}} | ||
| + | |||
| + | * ALLOY WHEELS | ||
| + | * NISMO 40224-E7200 NUT/SQUARE SHOULDER | ||
| + | ** For most alloy wheels. Shank: 19mm (0.748"), Length: 14mm (0.551") | ||
| + | * 40224-R4626 NUT SET-WITH LOCK (FOR ALMI) B310 | ||
| + | * 40224-R4670 NUT-ROAD WHEEL,FOR ALUMINIUM B310 | ||
| + | * Dorman 611103 AutoGrade/RB kit611-103 Mag-Short Shank | ||
| + | * Dorman 611107 AutoGrade/RB 611-107-006 Mag-Standard (2 pc. construction) | ||
| + | |||
| + | {{Album|21812}} | ||
| == SSR Mark I and Mark II == | == SSR Mark I and Mark II == | ||
| [[SpeedStar Wheels]] Mark 1 or Mark 2 requires a special nut. Imported from Japan. About $5 each in USA (includes washer). MK-I or MK-II M12 x 1.25, they are NOT tapered, but are shank nuts, although a different diameter than most. | [[SpeedStar Wheels]] Mark 1 or Mark 2 requires a special nut. Imported from Japan. About $5 each in USA (includes washer). MK-I or MK-II M12 x 1.25, they are NOT tapered, but are shank nuts, although a different diameter than most. | ||
| - | http://www.more-japan.com/files/t_20625.jpg | + | {{Photo!|image_5388676b99d86_1.jpg}} |
| - | <br>USA: http://www.more-japan.com/ssr-mk-i-mk-ii-lug-nut-m12x1.5-w-washer.html | + | USA: [http://www.more-japan.com/SSR-MK-I-and-MK-II-Lug-Nut-M12x1.25-w-Washer-PARTS037.html more-japan.om] |
| - | + | ||
| - | * 17.1mm shank diameter | + | * 17.1mm shank diameter |
| - | * 19mm depth | + | * 19mm depth |
| - | NiceProducts (Australia) part number M300 | + | NiceProducts (Australia) part number M300 |
| == Locking Nuts == | == Locking Nuts == | ||
| Magnetic Locks | Magnetic Locks | ||
| - | [http://datsun1200.com/modules/myalbum/photo.php?lid=24435 http://datsun1200.com/modules/myalbum/photos/thumbs/24435.jpg] | + | {{Album|24435}} {{Album|24436}} |
| - | [http://datsun1200.com/modules/myalbum/photo.php?lid=24436 http://datsun1200.com/modules/myalbum/photos/thumbs/24436.jpg] | + | |
| - | [[Category:Wheel And Tire]] | + | [[Category:Wheel And Tire]]{{End}} |
Current revision
Wheel Studs and lug nuts for Datsun 1200 are M12x1.25 thread. Nuts are 19mm hex head (~3/4 inch).
Discussion: extra long wheel stud info
Contents |
[edit]
Specifications
Thread: M12 x 1.25
Torque: 8.0-9.0 kg/m (58-65 ft-lb)
from the 1978 B120 factory service manual (English RHD/LHD)
Drum (clip head) VS Disc (round head)
[edit]
Disc Brakes
* Head Code: 240 * Knurl Diameter: 13.00mm * Thread Pitch: Right * Shoulder Length: 10mm * Thread Size: M12-1.25 * Length: 32mm * Type: Serrated Stud
[edit]
Drum
* Nissan Part Number 40222-18000 BOLT-HUB ROAD WHEEL (B110 & B120) * Head Code: 242 * Knurl Diameter: 12.56mm * Thread Pitch: Right * Shoulder Length: 11.5mm * Thread Size: M12-1.25 * Length: 37.5mm * Type: Shoulder Stud w/Clip Head
[edit]
Part Numbers
[edit]
Front, Drum Brakes
40222-18000 BOLT-hub (for front drum brake)
[edit]
Front, Disc Brakes
* Nissan 40222-22001 BOLT-hub (for disc brake) * Dorman 28321 (Head Code N) * Dorman 610-240 (610240)/610-2401/98320/983201 * Wagner/Guardian/One Source BD60980 [knurled] at RockAuto * Raybestos 27792B [knurled]
Stock Fits * 1971-1973 Datsun 1200 * 1980-1981 Datsun 810 * 1970 Datsun 2000 * 1974-1975 Datsun B210 USA NOTE: 1976-1978 uses 40222-A0800 * 1974-1978 Datsun 120Y (A12-powered B210) * 1984-1986 Nissan 200SX * 1986-1994 Nissan D21 Pickup * 1979-1982 Datsun 210 * 1976-1978 Datsun F10 * 1970-1973 Datsun 240Z * 1998 Nissan Frontier * 1974-1975 Datsun 260Z * 1982-1984 Datsun Maxima * 1975-1978 Datsun 280Z * 1987-2006 Nissan Pathfinder * 1979-1983 Datsun 280ZX * 1995-1997 Nissan Pickup * 1984-1986 Nissan 300ZX * 1983 Nissan Pulsar * 1968-1973 Datsun 510 * 1983-1986 Nissan Pulsar NX * 1973 Datsun 610 * 1982-1986 Nissan Sentra * 1977-1979 Datsun 620 * 1982-1986 Nissan Stanza * 1980-1986 Datsun 720 * 2000-2006 Nissan Xterra * 1997-2003 Infiniti QX4
Head Code N Fits * 1972-1973 Datsun 1200 * 1984-1988 Nissan 200SX * 1986 Nissan 720 Pickup * 1986-1993 Nissan D21 Pickup * 1987-1993 Nissan Pathfinder
[edit]
Rear
NOTE: Fits B110, B120, B210, B310. Also B110 front drum
For H145, H150 and H165
* Nissan 40222-18000 BOLT-HUB ROAD WHEEL (B110 & B120) $3.60 USD * Dorman 98340/983401/610242 RockAuto * Dorman 28340 (Head Code D.4.0) * NISMO 40222-H5020 [2" long/51mm] * Wagner BD60951 [non-knurled] * Raybestos 9340B [non-knurled]
Application: * B110 * B120 * B210 * B310
[edit]
Extra Long
NISMO Long Hub Bolts 13.0 mm knurl Front S13 * 40222-RS010 50 x 8 * 40222-RS020 60 x 8 Rear S13/S14 * 40222-RS015 50 x 10 * 0222-RS025 60 x 10
Buy at Bprojects * HKB Sports Racing 47 mm studs * For disc hubs or drum hubs (have notched heads)
NISMO 40222-A0220 [2" long/51mm] * For A-series front disc, 510, rear of FWD models, many more
NISMO 40222-H5020 [2" long/51mm] * For A-series rear drum, front drum
12.9 instead of 13.0 mm knurl. The 510 and Z-car guys use them to replace the front lugs (which are the same as B110).
* 40222-15C01 GC22 Van $2.12 USD each * 43222-0B001 V40 Quest $9.47 USD each * NAPA/Balkamp 6412785 $2.29 USD each * Dorman 610-403 (610403) $1.34 Rockauto Type: Serrated Stud Thread: M12-1.25 Knurl Dia.: 12.90mm Length: 45.5mm Shoulder Length: 15mm * Infiniti J30 front 1995-93 * Nissan VAN Front 1988-87, From 1/88 * Nissan QUEST Rear 1998-93, From 1/88
Fits S13 disk-over-hub conversion S13 (1989-1994 Silvia) Studs: * Dorman 610320/98350/983501/983551 (S13 Rear & Front, flat head) * Head Code: 320 (19mm diameter?) * Knurl Diameter: 12.83mm * Thread Pitch: Right * Shoulder Length: 14mm * Thread Size: M12-1.25 * Length: 41.5mm (~47mm overall) * Type: Serrated Stud Fits: Most Datsun/Nissan 1970-2006 Repco S457 will fit, but are a bit longer * M12 x 1.25 * 12.9mm knurl diameter * 43.8mm length * 13.9mm shoulder FITS * Most Nissan-Datsun * Ford Corsair 1989-1992 * Holden Astra/Vectra LD 1988-1992
Also see: Dorman 28355 (Head Code NS, rounded), some Datsun/Nissan including S13.
Extra-Long Repco NS3430 * 12.8mm knurl diameter * 55mm length * 9.5mm shoulder
Super Extra-long Repco Stud S4570 * 5.3mm longer shoulder (works with S13 disk-over-hub conversion) * 77mm long overall * 72mm long minus head * 12.7mm knurl diameter * 19mm dia head Buy at nice products
[edit]
Nuts
Lug Nuts for steel wheels
* 19 mm hex head * taper seat Nissan 40225-27700 B110 NUT-ROAD WHEEL Nissan 40224-21000 B310 40224-21001 Nissan 40224-M7210 NUT-ROAD WHEEL (FOR STYLED) [Acorn style] <> 40224-M7200 NISMO 40224-R1120 NUT/TAPERED RAYBESTOS Professional Grade 10018N
40225-27700
* Dorman 711406 AutoGrade/RB 711-406-005 Open End-Bulge Seat * Dorman 611064 Autograde/RB 2029933 (09140-12026, 09159-12020, 28171XA00A, 30015781, 40225-27700, 6230 06002, 6230 06003) ** Standard Open Nut ** Thread M12-1.25 ** Hex Size 19mm ** Length 16mm ** Seat Angle 60 deg ** Finish Chrome * Dorman 611174 AutoGrade/RB 611-174-006 Acorn, Bulge Seat, Hex Size E * Dorman 611099 AutoGrade/RB 611-099-006 Acorn, Hex Size A, 1-pc
[edit]
Alloy Wheel
Nissan 40224-R4626 NUT SET-WITH LOCK (FOR ALMI) (4 sets per car) Nissan 40224-R4670 NUT-ROAD WHEEL,FOR ALUMINIUM * B310,R30,F30,E23/E24,K10,910,C31,M10,N12,S110,U11,Z31 * Z Rims
* ALLOY WHEELS * NISMO 40224-E7200 NUT/SQUARE SHOULDER ** For most alloy wheels. Shank: 19mm (0.748"), Length: 14mm (0.551") * 40224-R4626 NUT SET-WITH LOCK (FOR ALMI) B310 * 40224-R4670 NUT-ROAD WHEEL,FOR ALUMINIUM B310 * Dorman 611103 AutoGrade/RB kit611-103 Mag-Short Shank * Dorman 611107 AutoGrade/RB 611-107-006 Mag-Standard (2 pc. construction)
[edit]
SSR Mark I and Mark II
SpeedStar Wheels Mark 1 or Mark 2 requires a special nut. Imported from Japan. About $5 each in USA (includes washer). MK-I or MK-II M12 x 1.25, they are NOT tapered, but are shank nuts, although a different diameter than most.
USA: more-japan.om
* 17.1mm shank diameter * 19mm depth
NiceProducts (Australia) part number M300
[edit]
Locking Nuts
Magnetic Locks
¤