| A12
 Steele87  Members  2004/6/15 5:02  Tell a friend
 2402  0  0.00 (0 votes)
|
| My Datto
Steele87 Members 2004/6/15 5:00 Tell a friend
2433 0 0.00 (0 votes)
My Datto, waiting to be restored... Or sold.
Any ideas as to a price to ask? |
|
| Blue Lake 2004 - ten 1200s
ddgonzal Meetings 2004/6/15 2:03 Tell a friend
4189 0 0.00 (0 votes)
| Nine 2-dr sedans and one coupe |
|
| Adams 1200
AdamBDA Track 2004/6/14 12:08 Tell a friend
3010 2 0.00 (0 votes)
| A 12, 2 40mm delortos, extractor, forged flatop pistons, locked diff, custom kings springs, koni race adjustable shocks, full roll cage, 13x185 advan race rubber, ground up rebuild |
|
| Rust 3
holeshot Misc 2004/6/14 11:00 Tell a friend
2268 0 0.00 (0 votes)
| I have made bottom pices for all the doors from 1mm sheet,that is 8 pices L/R F/B for 2 B210.The back doors pices were the hardest to shape and fit to door to many curves.In one of these photos is a back door I had done the day before in the back ground |
|
| D1
dan_fjt Forum 2004/6/14 10:59 Tell a friend
3551 7 0.00 (0 votes)
|
| Rust 2
holeshot Misc 2004/6/14 10:48 Tell a friend
2205 0 0.00 (0 votes)
| cut the baddy bit off and repair any iner panel rust at this stage |
|
| Rust 1
holeshot Misc 2004/6/14 10:43 Tell a friend
2241 0 0.00 (0 votes)
| size it up and predrill holes to spot weld with mig welder |
|
| My CA
NZ_datto Engine 2004/6/14 10:34 Tell a friend
3402 4 0.00 (0 votes)
|
| Custom Tunnel Ram intake
blownb310 Engine 2004/6/14 5:15 Tell a friend
5800 8  1.00 (1 vote)
| This is an intake I fabricated years ago for a drag strip B210 Honeybee I had. The carb is a Rochester 2 bbl. off of a Chevy 350 V8. It was mounted on an A14 [1mm over] with a Nismo Race cam #2, ported head, and a Nismo header. Car ran 14.07 @ 96.9 mph. |
|
