[< Previous 283 284 285 286 287 288 289 Next >]
machine work needed
 ca18det_man  2004/3/11 12:09  Tell a friend
 3685  2  0.00 (0 votes)
| Hubs machined down. Center hole enlarged and 4 new holes drilled in rotor to bolt to rear of hub and 3mm spacer made for calliper spacing off strut. |
|
|
[< Previous 283 284 285 286 287 288 289 Next >]
The comments are owned by the poster. We aren't responsible for their content.
| Poster |
Thread |
| Team_Dat |
Posted: 2004/6/14 5:35 Updated: 2004/6/14 5:35 |
No life (a.k.a. DattoMaster)   Joined: 2003/5/8 From: Perth W.A Posts: 1382 |
 Re: machine work needed what ar4e the disk from and what calipers are you using?
|
|
|
|
| Poster |
Thread |
| ca18det_man |
Posted: 2004/8/29 11:44 Updated: 2004/8/29 11:44 |
No life (a.k.a. DattoMaster)  Joined: 1999/11/25 From: Mudgee NSW Australia Posts: 1187 |
Re: machine work needed The disks are from a R32 GTS-T 280mmx30mm the callipers im using are from a Z32 300zx (same as R32 GTR calliper)
|
|
|
|
Mechanical
Brakes