im under the impression that these struts arnt actually in rally-a-coupe's 1200 yet, hes just got them waiting and hes going to try and figure out how to put em in later, im thinking it would be easier to modify discs/calipers to fit rather than entire strut, do these fit in 13's i hink they do actually but confirmation would be good!

they are standard struts i dont know what model subaru they are off i brought them for $20 each but i can find out what they are

Hey rally-a-coupe !

Any luck with finding what model sub' these are off ? What's involved with this conversion??

Cheers

ill try

my mates old man was talking to me about brakes off an "early 80's model subaru" once, probably same thing, if that helps?

Early 80s would probably be the Subaru Leone/DL/GL, but they are only 230 mm rotors. The B310 Sunny (and A10 Stanza/510) rotors are 245mm. Leone came with either solid or ventilated. With a 44 mm height about 7mm will need to be machined off the hub-mating face of the rotor (they are 15mm thick there, while S13 & B210 faces are only 8mm thick).

Being small, they might fit under 12" alloy wheels???

The mid-to-late 80s Leone series II (1985-1991) had 242mm ventilated rotors. They are still not big, but they are ventilated. With a 51.9 height I doubt these are the ones in the photo.

They come with the same 70mm centering hole as B110, with 90mm bolt circle instead of B110's 87mm (both Subaru and B110 use M10 holes).

And they are cut out in the center for weight reduction, which is always good.

Cheers for that rally-a-coupe, i look foward to finindg out..

the strut are std 1200 and some one has made an adaptation plate for the caliper no these arnt going in my car yet i have a set of sunny struts and discs