[< Previous 3408 3409 3410 3411 3412 3413 3414 Next >]
[< Previous 3408 3409 3410 3411 3412 3413 3414 Next >]
The comments are owned by the poster. We aren't responsible for their content.
| Poster |
Thread |
| kale |
Posted: 2007/2/6 21:14 Updated: 2007/2/6 21:14 |
Just can't stay away   Joined: 2006/1/28 From: Posts: 79 |
 Re: Kale putting it on the dyno this weekend to get the tuning correct. Give me your predictions of what it will make at the wheels? running a 60 series box and h165.
|
|
|
| Poster |
Thread |
| kale |
Posted: 2007/2/5 23:38 Updated: 2007/2/5 23:38 |
Just can't stay away Joined: 2006/1/28 From: Posts: 79 |
Re: Kale A15 bored 80 thou
daihatsu dome toped pistons
12 to 1 comp
45/70 cam with 480 thou lift!
shotpeened rods
lightened crank
3 angle valves 42mm inlets 33mm exhaust valves with sculptured chambers
match ported and polished
double valve springs
a12 flywheel
fully balanced
twin 40mm webers
extractors
electronic ignition
Will make 160hp at the fly
|
|
|
|
| Poster |
Thread |
| ca18det_man |
Posted: 2007/2/6 21:24 Updated: 2007/2/6 21:24 |
No life (a.k.a. DattoMaster)   Joined: 1999/11/25 From: Mudgee NSW Australia Posts: 1187 |
Re: Kale If its making 160hp at the fly it should be pushing around 115-120hp at the wheels
My guess around the 100-110hp at the wheels Cheers Andrew
|
|
|
|
|
| Poster |
Thread |
| Grunterhunter |
Posted: 2007/2/13 7:50 Updated: 2007/2/13 7:50 |
Home away from home   Joined: 2005/3/28 From: Stray-ya Posts: 528 |
Re: Kale 100-110hp at the treads is what I am hoping for out of my supercharged A15 when I push 8psi through it...... If you can get 115-120rwhp from a reliable street driven(?)/ street driveable A15 you are doing very well indeed. I'll be keen to see how it comes up.
|
|
|
|
|
| Poster |
Thread |
| jaimecidpedro |
Posted: 2007/2/13 8:34 Updated: 2007/2/13 8:34 |
No life (a.k.a. DattoMaster) Joined: 2001/8/2 From: Posts: 1354 |
Re: Kale Very nice and fast A engine. I can never stop looking at a twin DCOEd A series  |
|
|
|
|
| Poster |
Thread |
| Dundee1000 |
Posted: 2007/8/31 0:56 Updated: 2007/8/31 0:56 |
No life (a.k.a. DattoMaster)  Joined: 2003/2/10 From: Freo Posts: 3318 |
Kale How did it come up on the rollers? |
|
|
|
|
| Poster |
Thread |
| kale |
Posted: 2007/8/31 4:58 Updated: 2007/8/31 4:58 |
Just can't stay away Joined: 2006/1/28 From: Posts: 79 |
Re: Kale had it on the dyno to tune the carbies and was making circa 110hp at the treads
|
|
|
|
Misc
2007/2/5 21:35 
Tell a friend
2288 
7 
0.00 (0 votes)