[< Previous 13 14 15 16 17 18 19 Next >]
New bits
 matty  2008/7/28 12:24  Tell a friend
 1934  7  0.00 (0 votes)
| Finally had the opportunity to spend some time and money on my 1200. |
|
|
[< Previous 13 14 15 16 17 18 19 Next >]
The comments are owned by the poster. We aren't responsible for their content.
| Poster |
Thread |
| matty |
Posted: 2008/7/28 12:31 Updated: 2008/7/28 12:31 |
No life (a.k.a. DattoMaster)   Joined: 2003/3/28 From: brisbane Posts: 1880 |
 Re: New bits With a track day at Lakeside fast approaching I have fitted the following parts over the past few weeks:
CA 15" alloys with new 195/50 and 205/50 Toyo R888 semi's.
Rebuilt SR20DET front brake calipers with ADR approved braided lines and Intima intermediate brake pads.
RDA slotted front 280mm rotors.
Lucas intermediate rear brake pads.
New 13/16" brake master cylinder.
New race seat.
I have booked my car in to have another muffler fitted next week too as there are noise regs at Lakeside nowadays.
My wallet is hurting but I'm getting excited about racing on a track I haven't seen for over a decade.
Matty
|
|
|
|
| Poster |
Thread |
| A14force |
Posted: 2008/7/29 6:51 Updated: 2008/7/29 6:51 |
No life (a.k.a. DattoMaster)  Joined: 2003/12/3 From: Christchurch NZ Posts: 3706 |
Re: New bits Which model car are the calipers off? Are the rotors 280ZX?
|
|
|
|
|
| Poster |
Thread |
| ANGE |
Posted: 2008/7/29 9:03 Updated: 2008/7/29 9:03 |
No life (a.k.a. DattoMaster)  Joined: 2003/3/2 From: Melbourne AUS Posts: 3300 |
Re: New bits these are the 280mm s13 variety?
minimum 15inch wheels now hey?
i bet they stop real quick too
i know the 250mm ones do...
nice matty
|
|
|
|
|
| Poster |
Thread |
| matty |
Posted: 2008/7/29 12:39 Updated: 2008/7/29 12:39 |
No life (a.k.a. DattoMaster) Joined: 2003/3/28 From: brisbane Posts: 1880 |
Re: New bits Yep SR20DET S13 Silvia brakes. I previously had the CA18DET ones which were fantastic. I have gone bigger as I have more horsepower now and things were starting to get hairy at QR.
I have 5 or so sets of 14" alloys and only one set would go over the calipers with a small amount of grinding on the edges of each caliper but I've chosen to go to 15" wheels for more semi slick options anyway.
Cheers Matty
|
|
|
|
|
| Poster |
Thread |
| A14force |
Posted: 2008/7/30 7:01 Updated: 2008/7/30 7:01 |
No life (a.k.a. DattoMaster) Joined: 2003/12/3 From: Christchurch NZ Posts: 3706 |
Re: New bits My mistake!
I saw the reflection on the mega shiny new discs, and thought they were jutting in the way that the 280ZX rotor/hubs do. And I thought the threaded
rotor removal off the hub holes were the back of the screw holes that hold the rotor to the hub. How wide is the friction area of the rotor, and how thick are they?
|
|
|
|
|
| Poster |
Thread |
| matty |
Posted: 2008/7/31 13:34 Updated: 2008/7/31 13:34 |
No life (a.k.a. DattoMaster) Joined: 2003/3/28 From: brisbane Posts: 1880 |
Re: New bits Not sure mate. I will measure them the next time the wheels are off.
Matty
|
|
|
|
Members
matty