[< Previous 652 653 654 655 656 657 658 Next >]
ALUMINIUM/BISALLOY FLYWHEEL FOR CA18DET
 feral  2004/4/6 11:18  Tell a friend
 3838  5  0.00 (0 votes)
| This is a charming little number for the CA18DET of a customer. It weighs in at 5.050 kg's as compared with the 14 kg of the stock one. Will look good topped of with an EXEDY sports clutch!!!!! |
|
|
[< Previous 652 653 654 655 656 657 658 Next >]
The comments are owned by the poster. We aren't responsible for their content.
| Poster |
Thread |
| Demojob |
Posted: 2004/4/6 12:03 Updated: 2004/4/6 12:03 |
No life (a.k.a. DattoMaster)   Joined: 2002/6/8 From: Warwick, QLD Posts: 1170 |
 Re: ALUMINIUM/BISALLOY FLYWHEEL FOR CA18DET How much would one of these set me back???
Damo
|
|
|
|
| Poster |
Thread |
| feral |
Posted: 2004/4/6 14:31 Updated: 2004/4/6 14:31 |
Home away from home   Joined: 2002/5/1 From: Millgrove Vic OZ Posts: 985 |
Re: ALUMINIUM/BISALLOY FLYWHEEL FOR CA18DET They are $650 with a trade in flywheel (or auto flexplate) for the ring gear. Supply a new ring gear if desired.
They give excellent response, as they weigh 9 kg less than stock unit.
The down side is you dont get that flywheel effect on hills allowing you to lug the engine at low revs.
|
|
|
|
|
| Poster |
Thread |
| dattoman_1000 |
Posted: 2004/4/7 10:00 Updated: 2004/4/7 10:00 |
No life (a.k.a. DattoMaster) Joined: 2002/8/11 From: Perth Posts: 2691 |
Re: ALUMINIUM/BISALLOY FLYWHEEL FOR CA18DET Looks alot like mine.......but I guess they all do
ARC ?
|
|
|
|
|
| Poster |
Thread |
| feral |
Posted: 2004/4/7 13:44 Updated: 2004/4/7 13:44 |
Home away from home Joined: 2002/5/1 From: Millgrove Vic OZ Posts: 985 |
Re: ALUMINIUM/BISALLOY FLYWHEEL FOR CA18DET dattoman_1000,
You guessed in one. A lovely bit of kit that is so finely balanced, my last one didnt need a 0.25 gram taken of anywhere!!
Very smart operator!
|
|
|
|
|
| Poster |
Thread |
| dattoman_1000 |
Posted: 2004/4/11 2:08 Updated: 2004/4/11 2:08 |
No life (a.k.a. DattoMaster) Joined: 2002/8/11 From: Perth Posts: 2691 |
Re: ALUMINIUM/BISALLOY FLYWHEEL FOR CA18DET Yep he does good work
After I had the clutch installed I had the whole assy balanced.
There is one small "scrape" along the back of the unit. Hardly noticeable. And this was to compensate for the plates. The flywheel itself is true.
Highly recommended machinest.
Shame he's so far away....and won't sell me the efi hardware (contract deal)
|
|
|
|
|
| Poster |
Thread |
| D |
Posted: 2004/4/11 10:09 Updated: 2004/4/11 10:09 |
No life (a.k.a. DattoMaster)  Joined: 2002/10/28 From: under the Firmament LOL no twiglight effect BS Posts: 10935 |
Re: ALUMINIUM/BISALLOY FLYWHEEL FOR CA18DET Itsa beautiful thing
|
|
|
|
Mechanical
Drive Train