User Login    
 + Register
  • Main navigation
Main Menu
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search

Advanced Search
Google Ad

Main : Mechanical : Engine Left side of SR20 in 1200

[<   Previous  2445  2446  2447  2448  2449  2450  2451  Next   >]

Left side of SR20 in 1200
Left side of SR20 in 1200Popular
SubmitterAFRacerMore Photos from AFRacer   Last Update2004/5/15 8:58    Tell a friendTell a friend
Hits5730  Comments5    0.00 (0 votes)0.00 (0 votes)
The most wondered about area on a SR20 powered LHD car, lots of clearance with stock outlet pipe, turbo, and stock turbo location

[<   Previous  2445  2446  2447  2448  2449  2450  2451  Next   >]

The comments are owned by the poster. We aren't responsible for their content.

Poster Thread
b310gx
Posted: 2004/5/16 6:21  Updated: 2004/5/16 6:21
No life (a.k.a. DattoMaster)
Joined: 2002/7/19
From: sydney australia
Posts: 1858
 Re: Left side of SR20 in 1200
that top radiator hose is going to be a real bitch to work around.just a suggestion,
because you probably already have a fix,
but the ga16 engine used in n14 & n15 pulsars had an outlet that came straight out of the block & didn't do the 90 degree bend.i don't know if the stud spacing is the same,but it might be worth a look,because that would give you a plethora of pinyatas,ooops,room for the top hose.

Poster Thread
YRL05S
Posted: 2004/5/16 6:29  Updated: 2004/5/16 6:29
Home away from home
Joined: 2002/11/25
From: Sydney
Posts: 393
 Re: Left side of SR20 in 1200
That's not a standard manifold though.
Also it's a bit close to the brake fluid, also are they going to be running a booster?

Poster Thread
2332owner
Posted: 2004/5/16 7:41  Updated: 2004/5/16 7:41
No life (a.k.a. DattoMaster)
Joined: 2003/5/5
From: Okinawa, Japan
Posts: 1292
 Re: Left side of SR20 in 1200
I doubt any kind of booster would fit. He said he's jet hot coated the header which should bring temps down but a good sheild should do the trick as I'm sure he's already planned.

Poster Thread
2332owner
Posted: 2004/5/16 7:48  Updated: 2004/5/16 7:48
No life (a.k.a. DattoMaster)
Joined: 2003/5/5
From: Okinawa, Japan
Posts: 1292
 Re: Left side of SR20 in 1200
This would maybe fix the thermostat housing:



GTi-R or probably any FWD/AWD SR20 again, not sure about the bolt pattern since it's a different head.

Poster Thread
YRL05S
Posted: 2004/5/16 12:38  Updated: 2004/5/16 12:38
Home away from home
Joined: 2002/11/25
From: Sydney
Posts: 393
 Re: Left side of SR20 in 1200
A GTiR head may fix that thermostat problem, but look where the dizzy is. Been there done that.