[< Previous 68 69 70 71 72 73 74 Next >]
LA Lancer Booster + m/c
 WhiteSedan  2005/12/22 10:32  Tell a friend
 4593  3  0.00 (0 votes)
| Im not sure whether to use the Lancer m/c or go for a nissan one. Havent tried the booster against the firewall yet, ive read on here that it will foul on the strut tower, is this the booster or the m/c itself? But I can tell you now, Its a very long ugly unit. |
|
|
[< Previous 68 69 70 71 72 73 74 Next >]
The comments are owned by the poster. We aren't responsible for their content.
| Poster |
Thread |
| b310gx |
Posted: 2005/12/23 6:57 Updated: 2005/12/23 6:57 |
No life (a.k.a. DattoMaster)   Joined: 2002/7/19 From: sydney australia Posts: 1858 |
 Re: LA Lancer Booster + m/c i've seen it done both ways,lancer or nissan m/c,so if you done like the look of the lancer one,use a nissan one.you can get 13/16's to suit a sunny,or a 15/16's to suit a 260z,or a 3/4 to suit a 120y.you just have to machine the inside of the alloy bracket the m/c bolts to to clear the m/c.you could also machine down this section on the m/c,but i'd make it so you don't have to machine the m/c.
|
|
|
| Poster |
Thread |
| Lobster |
Posted: 2005/12/23 4:16 Updated: 2005/12/23 4:16 |
No life (a.k.a. DattoMaster)  Joined: 2002/8/25 From: Canberra, Australia Posts: 1618 |
Re: LA Lancer Booster + m/c I haven't done this myself.
But I thought you were meant to use the lancer booster and then a nissan master cylinder?
|
|
|
|
| Poster |
Thread |
| dattodude |
Posted: 2005/12/23 15:16 Updated: 2005/12/23 15:16 |
No life (a.k.a. DattoMaster)  Joined: 1998/12/6 From: Sydney, Australia Posts: 5806 |
Re: LA Lancer Booster + m/c Yeah, can be done either way.
I use, and normally recommend a 180B master cylinder.
But I've not fine tuned mine yet, the urvan one might prove better.
good pic.
|
|
|
|
Members
WhiteSedan